How do i lubricate my kenwood chef mixer - Kenwood KM400 / KM410 Chef Classic Stand Mixer

It sounds like there may be an issue with the motor in your Kenwood Chef Premier mixer. This could be caused by a variety of factors, such as a malfunctioning motor, a problem with the drive belt or gears, or an issue with the electrical components of the mixer. To troubleshoot the problem, you may want to try cleaning and lubricating the drive belt and gears, as well as checking the electrical connections and fuses.

Have you tried here? http://www.u-manual.com/download-manual-now-for-free-10/267574/mixer-kenwood-km-201-chef.html

They are lubricated with food grade grease, not oil. Any oil dripping out is coming out of the grease as the grease gets older and starts separating liquids from solids.

the speed control on my kenwood chef A901 is not working
how do i fix this.

[email protected], hi there guys, I want to lubricate my Kenwood A700 and would really appreciate your assistance as in what I must open and what type of lubricant would be suitable.

Check out ebay , often you can find parts for Kenwood

This kind of unit are lubricated with grase paste. If the unit stays inactive for a long time, or if the motor and gears are overheating the grease paste gets melted into thin oil, and that will cause leaks.

To lubricate the unit, you need to spread again the grease in the gearbox, using special foodsafe grease paste.
Disassemblying the gear box is not that easy, you will need previous experience and a gear puller to do the job properly and safely.
This appliances are also held with security screws to prevent the users from taking apart the unit, and can only be disassembled using a Security screwdriver tip.

The grease can be purchased here, check at the bottom of the page: Kenwood chef food mixer Grease.

Hi sometimes, its not the motor, maybe its the speed control, in this model same A701 its centrifugal system, if the capacitor or resistor not working fine, give this smell . you must give your Kenwood for repair or check

kenwoodchefrestore.co.uk

This kind of unit are lubricated with grase paste. If the unit stays inactive for a long time, or if the motor and gears are overheating the grease paste gets melted into thin oil, and that will cause the leak.
The oil leak is usually coming from the gear box inside the appliance.
To fix the problem the unit must be taken apart, and cleaned. After this step, there is need to spread again the grease, using special foodsafe grease paste.
Disassemblying the gear box is not that easy, you will need previous experience and a gear puller to do the job properly and safely.
This appliances are also held with security screws to prevent the users from taking apart the unit, and can only be disassembled using a Security screwdriver tip.

The grease can be purchased here, check at the bottom of the page: Kenwood chef food mixer Grease.

To open take off the top and open the three screws. Use light grease.