Question about Creative Labs Computers & Internet

Open Question

Wire conection to circuit board creative model1110

What each wire controls

Posted by on


3 Suggested Answers

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1884 Answers

SOURCE: My lawn tractor won't start

May be the coil is bad. have you checked the spark plug? If there is gas and spark then it will have to start.check the circuit breaker points. is there current in the cb points?

Posted on Sep 11, 2009

  • 27725 Answers

SOURCE: creative inspire 4.1 4400 volume controller lost


if your computer came with a motherboard disc the sound drivers could be on it
click start control panel administrative tools computer management device manager scroll to sound,video and game controllers you might see a yellow question exclamation mark? ! or a red X Right click to reinstall drivers

hope one of these will help you

Posted on Nov 15, 2011

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What color wires go to power switch and circuit breaker

If you use the code of NEC(National Electric Code) will be Red and Black and white.
However will be differences with this. In short black to any point and red to any pointsince you are trying Alternating Current VAC , There are No polarities need it,such inContinue Current. VDC, you must be carefully to conect the white wire to ground, will VERY CRITICAL.You can conect whatever will be the color in any point except the white color.sincerely.Will be a good idea for you to open the Male receptacle from power cord, and follow the wires codes. Except the white for the reason explain. If the wires changes for examples to yellow-green this will be the ground instead of the white.

Nov 21, 2011 | Nordic Track Nordictrack Exp 1000...

1 Answer

2006 mercury montego blower motor control does not work conected wire to blower motor and pluged into lighter blower worked on high tried another module but still didnt work checked all fuses they are...

replace the blower motor resistor. follow the wires from the blower motor to the resistor. the resistor controls the speeds on the blower. this is a very common problem in the winter time do to condensation coroting the circuit board on the resitor

Jan 15, 2010 | Mercury Montego Cars & Trucks

1 Answer

How do you check to see if the circuit board is working on a unit

open your control area,
check your l1 and l2 conections this unit is usually 220v
the control is this simple

voltage in no voltage out change the board

Oct 24, 2009 | Amana PTH123B25AJ Heat Pump Air...

1 Answer

The gauges are not working and the fuses on the inside panel are good

Not much to go on but here goes;;;The most common thing is the ground wire on the printed circuit behind the instrament cluster,or a broken circuit board. next,check to make sure the wire harness has not shook loose going into the cluster. then theres the wire harness that goes through the fire wall,,that could have a bad conection,,there is also in some vehicles,,a voltage regulater just for the cluster,,,and then theres that nasty computer that controls all the functions of your engine and sensors. My guess would be the circuit board first then a bad ground on the circuit board . A word of advise,,,be sure you checked ( all ) the fuses with a ohm meter and not a test light ! A test light can destroy your engine computer. And sometimes the fuse can look good but still be bad. Also ask your dealer if there are any hidden fuses that you cant see. They sometimes put them in strange places. Hope that helps !!

Aug 17, 2009 | 2001 Dodge Ram 2500 Truck

10 Answers

Creative Speaker Of Model SBS-370 The Volume Control is not working, How to directly Connect those two Wires connected to Volume control,bypassing the Volume Control Switch

1. connect:Both Ground (copper wires) with Green wire
2. Connect Red with Blue and
3. Connect White with Yellow
This will give Stereo Output.

Apr 19, 2009 | Creative Labs SBS 370 Computer Speakers

2 Answers

Battery replacement - Creative Zen

I now have 2 dead zens. to open them up I used my finger nail to get between the 2 halves. you have to slowly and carefully work them apart. once opened up there are several small phillips screws that must be removed, once removed you can now flip the circuit board over exposing the battery which is taped down with double sided tape and the wires are soldered into the circuit board. I intend to cut the wires and solder in new battery and use heat shrink tubing to insulate the wires the wires. Now all I have to do is find replacement batteries. pepsiman

Jan 06, 2009 | Battery Technology Creative Technology Zen...

1 Answer

Ac unit central

Sorry, we don't have water cois in our area.

Aug 07, 2008 | Goodman CLQ36AR49 Air Conditioner

1 Answer

A mess!

pls check your audio cable conection. bye

Sep 11, 2007 | Creative Labs Gigaworks S750 Computer...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

18 people viewed this question

Ask a Question

Usually answered in minutes!

Top Creative Labs Computers & Internet Experts

Shawn DuRee

Level 3 Expert

356 Answers

Damen Wong
Damen Wong

Level 3 Expert

1950 Answers


Level 3 Expert

13434 Answers

Are you a Creative Labs Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides