Setting Time on Lucent Partner 34D cuase error

Avaya Phone Change Date and Time
Avaya/Lucent Partner ACS Phone System

1. Press Feature and dial 00.
2. Press the left intercom button twice.
3. To set the time, press # and dial 103. Enter the correct time using a 24-hour format.
4. To set the date, press # and dial 101. Enter the correct date using MMDDYY format.
5. Press feature and dial 00 to save.

Setting the time and date on Avaya phone systems - TSRC.com

Since you ask this question under a Partner 18D, the answer for a Partner system is you go to extension 10 or 11 and, without picking up the handset, press FEATURE 00 and the left intercom button twice. Then for time you dial #103 and the 4 digit military time. Date is #101 and MMDDYY.

FEATURE 00 exits programming.

Carl

Partner ACS, any release
Changing the time on a Partner system must be done from extension # 10 or 11. 1. At station(Ext.10 or 11) press feature, 0, 0
2. Press the left intercom 2 times
3. Enter # 103
4. Enter the correct time in 24 hr. format, for example:
* to set the time for 09:00 A.M., enter 0900
* to set the time for 04:45 P.M., enter 1645
5. Press feature, 0, 0

http://dstech1.com/changing-time-on-a-partner/

Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout

Partner ACS, any release
Changing the time on a Partner system must be done from extension # 10 or 11. 1. At station(Ext.10 or 11) press feature, 0, 0
2. Press the left intercom 2 times
3. Enter # 103
4. Enter the correct time in 24 hr. format, for example:
* to set the time for 09:00 A.M., enter 0900
* to set the time for 04:45 P.M., enter 1645
5. Press feature, 0, 0

Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout

Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout

From the 34D at extension 10 or 11 press FEATURE 00 Left Intercom Left Intercom #103 and enter the 4 digit military time. (if you need it, the date is #101 in mmddyy format).

Press FEATURE to exit

Carl

Press "feature" 0 0 next press the left intercom button 2 times then press #103 (do this from extension 10 or 11)

enter the new time in 24 hour notation....ie 2:15 would be 1415 then exit programming by pressing "feature" 0 0 again.

Hope this helps.

Press
Feature 00
Left Intercom Twice
Dial #103
Enter Time in Military (14:05 = 2:05 PM)
Feature 00