Will not play CD's at all

Please update a firmware just down load from Philips site and load in a USB pen drive and connect in BDP and run firmware upgrade option in a menu

The problem is not the disc itself but your DVD player. If other discs still play in English, and it is just this one disc that plays in Spanish, then your player is using some sort of stored setting to recognize your preference for spanish on that particular disc.
Forgive me if you've already done this, but try turning unplugging the DVD player for a period of ten seconds or so, and then plug it back in. If there is a reset button, press it. See if the disc still plays in Spanish after that.
If so, you may need to navigate the DVD menu of the offending CD to turn off the language setting your daughter selected. If you don't speak Spanish, try navigating to the language settings on one of the other discs with the English menus. Memorize how you got there, and take the same path through the Spanish language menu. Return the language setting to English, and exit.
Hope this helps.

Your "Emergency Parking" wire is disconnected. You need to connect it to your parking brake, or you can also connect it to Parking switch if you have automatic transmission. You can play video only when parked

There is a workaround though...

Warning: In most states in US law bill bans drivers from operating televisions and video screens in their line of vision while the vehicle is moving.

Due to the law you can use this workaround at your own risk:

1. You can just ground the parking brake wire to your radio, and you are done.

OR

2. You can adjust factory settings

• Go to""Setup", and then to "Screen" menu
• with your remote press 543210, this will show a hidden menu
• now set the parking brake menu from "off" to "on".and exit the menu
• NOTE: disconnecting the car battery will reset the code to default "off" state.

MPB

Hi,
Does it do with original DVD or copied DVD ?.
if the original one works fine but the others not, your DVD may not capable of playing copy -R/RW discs..even though your DVD specs says: Plays DVD-Video, video-mode DVD-R/RW and DVD+R/RW, CD-R/CD-RW, MP3 CD, Kodak Picture CD, and JPEG image CDs, sometimes this happens due to bad recording of DVD .Try to use better recorded DVD or if possible use the original ones..
Thanks in advance for rating me..Regards

Hello,

the fault is from the lens. The lens is weak such that a lens cleaner cannot revive it to its former state.

If the player is still under warranty, it would be better for you to return it.

But if its not under warranty, then you will have to change the lens completely, to a brand new one. By so doing, the player will play all discs.

You need a more active lens for your player to play all discs.

Good luck.

do you have all the cables hock up right

Hello I was looking to try and help you with your DVD player, we will start by loading a music cd store purchased, no burned cds please, if the cd loads and plays then your dvd player is either out of adjustment or going bad, most dvd players, i have worked on, will load and play a music cd, but will show loading errors when trying DVD's. If the music cd dosen't load then there could be an issue with the drive or tray. If the music cd plays just fine, then your laser is either out of adjustment or going bad. You can call the manufacuter to see if there is a process for resetting the DVD player, not all DVD players have this option, if resetting the DVD player dosen't work, but music cd's do then your laser lens is dirty or going bad. At this point you have three options 1) Take it to a repair shop, 2) Get an new one, 3) Get your hands dirty if your really handy and know what your doing to clean and replace the laser. I hope I can be of further assitance and I look forward to helping in the future, Thank You and have a nice day.

It should recognise the discs. If you just bought it new, it's under warranty. Take it back and exchange it.

Geno

I think this is due to wrong Audio settings.
Try to change audio setting as Stereo/Right or Left/5.1 from the Audio setup of the Menu

check your power supply