At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Our Navman F20 has been dead for a few weeks now. Nothing happens when we plug in the car charger, nothing appears on the screen. The green light comes on the charger, but nothing else. It seems dead. Help?
Mine was working ok with no problems then the battery gone complete dead as I didn't charge it. Now nothing happens... no light no power.... joint seems to be alright?? is there any way to switch it on if not charged for a long time? cheersMine was working ok with no problems then the battery gone complete dead as I didn't charge it. Now nothing happens... no light no power.... joint seems to be alright?? is there any way to switch it on if not charged for a long time? cheers
AnonymousMar 28, 2014
Charger working screen nothing on itCharger working screen nothing on it
You can't post conmments that contain an email address.
Probably the plug on the navman has suffered what we call dry solder joints from inserting and pulling out the charger you need a tech to fix it. soldering is nesessary shouldnt be too expensive I fixed mine its about half an hours work if not too damaged inside
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it's not the original Navman usb loader then there's a easy solution to this : With a sharp knife carefully open the usb cable : you'll see four tiny cable's with different colours . You;ll have to cut two of those four cables ; Leave the black and red cable intact.
Use some tape to fix the cut in the usb cable. Now you can use your car charger and your navman won't go into usb mode.
i tried to put an address in to Oxford and it sent me to Banbury. When I ignored it, it just went quiet and said nothing more. Not like usual, when it wont *******.
It would not take a post code, just a town.
This has happened many times recently.
Your Navman will not run in car unless the output on the charger is 1000ma or 1a. you need to buy a genuine charger, motorola phone chargers do not have the output to run the unit
The problem is that most of the chargers have the output of 5V/0.5A. The charger for NAVMAN (C30 in my case) has 5V/1A. And that is causing the trouble. The GPS is undercharged and is switching off itself. Buy one which specify the output power: 5V/1A.
Hope I solved your problem
same as this guy,but I have no light comming on ... its just dead
Mine was working ok with no problems then the battery gone complete dead as I didn't charge it. Now nothing happens... no light no power.... joint seems to be alright?? is there any way to switch it on if not charged for a long time? cheers
Charger working screen nothing on it
×