Panasonic code what is the code for my new panasonic TH-42PZ80BA to work with my sky remote control and how do I do it please?

Hi Hans, Unfortunately that remote control will NOT work on a hisense television... The link below is a sky remote control codes site, Scroll down the list and HISENSE isn't on the 3 or 4 digit list. Sorry mate......

Sky Remote Codes

0381,0389,0388. Try these codes. If you wish to get more codes and other details check:
http://electrohelponline.blogspot.com/
http://electro-medical.blogspot.com/
Both the sites have setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.

0005

The codes I have are: Code 003 for Panasonic TV
Code 054 for Panasonic TV
Code 055 for Panasonic TV
Code 062 for Panasonic TV
Code 109 for Panasonic TV
Code 130 for Panasonic TV
Code 170 for Panasonic TV
Code 214 for Panasonic TV
Code 350 for Panasonic TV
Code 351 for Panasonic TV

The codes can be looked up here: http://remotefinder.rca.com/default.aspx?site=rca for most RCA remotes. Please note these codes will work for TVs released at least 6 months before the remote was programmed.

I hope this helps.

Cindy Wells

You have to programme the correct code for your TV into the Sky remote.

You can get these via "Sky Active" (if your box is connected to a phone line) or from the Sky website, or google search: "Sky remote codes".

However your sky remote wont necessarily control more recent televisions unless you have a REV8 remote control. You can check this by taking the battery cover off your remote and looking at the sticker inside. If it says RC1600/00 you're probably not going to be able to control your TV. REV4 and REV6 are more likely to work - but not guaranteed. If it says REV8, then you are probably not using the correct code or you're not programming the remote correctly.

If you have REV8, the correct code for your TV (according to Sky) is: 0678 or 1678 or 0254

Sky remote code finder page is here: http://sky.uebv.com/

Sky guide to finding your remote code and programming remotes is here:

http://www.sky.com/helpcentre/tv/sky-remote-control/program-your-sky-remote-control-to-work-with-your-tv/

Please rate my solution if you find this helpful. Thanks.

With you sky remote follow the steps below:

TV
RED + SELECT ( flashes twice )
TV
0051

now try the volume button. If this works then press SELECT to save. If not press TV and then volume again. Repeat this step until the volume works then dont forget to press the SELECT button to store the code.

Job Done. Please leave a thumbs

Cheers

Little Dish Fitter

try these
Code For Model RCR412S
Code 1003 for Panasonic TV Code 1054 for Panasonic TV Code 1062 for Panasonic TV Code 1109 for Panasonic TV Code 1170 for Panasonic TV Code 1248 for Panasonic TV
you can find codes at http://remotefinder.rca.com/default.aspx?site=rca if you ever need codes for other.

please follow the steps below:

TV
RED + SELECT (flashes twice)
TV
0051

try the volume if this works then press SELECT to save the code. If not then press TV again then the volume. repeat this step until the volume works then press the SELECT button to save the code.

cheers

Little Dish Fitter

1. Press tv on your Sky remote control.

2. Press and hold down select and the red button together until the red light at the top of your Sky remote control flashes twice.

3. Press tv again

Then enter the remote control code using the number keypad. The red light will flash twice if a valid code has been entered.

Panasonic Code: 0051

4. Point your Sky remote control at your TV and press the Power button. If this turns the off as you'd expect, then the tv should be set, press Select and the remote should work

5. If the TV does not turn off press tv, then press the Power button again, repeat this process until the TV turns off, when the TV turns off press Select.

1. Press tv on your Sky remote control.

2. Press and hold down select and the red button together until the red light at the top of your Sky remote control flashes twice.

3. Press tv again

Then enter the remote control code using the number keypad. The red light will flash twice if a valid code has been entered.

Panasonic Code: 0051

4. Point your Sky remote control at your TV and press the Power button. If this turns the off as you'd expect, then the tv should be set, press Select and the remote should work

5. If the TV does not turn off press tv, then press the Power button again, repeat this process until the TV turns off, when the TV turns off press Select.