Disc will not come out in samsung ht x810 how do i get rear cover off

This place seems to stock Samsung spare parts.
http://www.samsung-sparesby4oh.co.uk/dvd-video-home-cinema/ht-x810-ht-x810txme/catalogue.pl?path=627412,627439&model_ref=9535925

Smash away. I don't think you can connect a wireless piece to a sound bar. This may be out of my wheelhouse, but I don't think so.

May be thermal protection issue on component?? check..

Have you tried cleaning the laser with a DVD Cleaning Disc or more in depth by removing the top cover and using DVD Cleaning Fluid & QTips.

If you've tried both these without success then I'm affraid that your laser has failed and in most cases even when replacement lasers are available it's not cost effective to replace it.

TRY THIS
1. Remove disc from tray.
2. Switch off player and unplug power cord.
3. Wait 30 seconds, then reconnect power cord.
4. Turn on player with remote. Wait for player to finish loading and display 'no disc'.
5. Press enter on remote. (There will be no on-screen response.)
6. Press 8, 4, 2, 6, 9 on the remote. (There will be no on-screen response.)
7. Press enter on the remote. Player will automatically shut off.
8. Turn player on.
9. Turn off.
10. Turn player on then off again.
11. Player is now region-free.

Hi, Please get the code here : www.dvdoverseas.com/dvd.htm
www.regionfreedvd.net/
Regards,Jay__kjn78

Find it free at retrevo.com

http://www.retrevo.com/support/Samsung-HT-X810T-Home-Theater-Systems-manual/id/18378dj388/t/2/

Purchased a x810 & everything tests out fine except TV signal sounds from cable box. We have the Comcast cable box connected to the 50" Samsung Plasma TV hooked up to Samsung x810 Soundbar all using HDMI cables. But we are not getting cable shows sound through Soundbar. Please advise

go to samsungusa.com and look for a listing for codes, or you can go to the store and look at a universal remote package for the code

Hi there, this code should allow you to unlock your HT-X810. I'm not sure about the HT-X810R specifically, but its worth a shot, let me know if you need any further assistance,

First, turn on the X810 without any disc in the player.
Next, press [Enter][8][4][2][6][9][Enter]