Can not get into tinychat with mac pro

Sorry to hear that. You might want to post this question in the android apps forum.

I’m happy to help further over the phone at https://www.6ya.com/expert/matt_7e951e081251ffbc

1st You download Webcam Driver.
My webcam doesnt work in tinychat, but works on skype and yahoo etc...
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

Check for a failing hard drive<br> <br> Trying booting from the Mac OS X install disc. insert the Mac OS X install disc. press the start button, while holding down the "C" key on the keyboard<br> <br> Once you are running from the disc. go to Disk Utilities select the hard drive click the "repair permissions" button at the bottom.<br> <br> If you get any red errors listed or it doesn't seem to finish repairing the permissions you have a failing hard drive and it will need to be replaced.

The antennas in the Macbook Pros have had an issue with reception due to the aluminum housing of the laptop but, should still receive decent reception just not as much as a plastic Macbook or plastic PC laptop. It could be possible that the antenna's cables have become disconnected from the Airport Extreme card inside your Macbook Pro, that the card itself is faulty or damaged or that the Antennas themselves have been damaged in some way. As always make sure you have the latest updates and have installed any driver updates from Apple regarding your Airport Extreme card. Here's an article that may help eliminate any wireless interference that may be affecting your signal strength. Apple - Wireless Interference hope this helps, if so don't forget to comment, vote, etc. Thank you.

You may need to give permission when connection is made

I had the same problem! This worked for me: open the lifecam program, click settings and lower the resolution. Remember to close the program before trying to use tinychat again. Hope this helps! :)

i recently made a tinychat, but i dont know how to work it with my bulit in webcam? what do i do?

try to find flashplayer version 9 . there is an issue with version 10 on tinychat

Hello Qutta81,

I need a little more information about this issue in order to help you. What internet browser are you using? (IE6, 7, or 8, Firefox, Safari, Chrome etc.) Also what operating system are you using? (Windows Vista, XP, 2000, or a Mac operating system such as 10.5, 10.4 etc)

Do you have multiple web browsers to test it in to see if it is a specific web browser issue?

Does it only happen on You Tube videos or does it happen on all videos on the web?

ok When you turn on your computer and it autimaticaly logs you in you need to log yourself out and then on the screen where you put your user name and password, there will be a little box thats says, save my password and there will be another one that says sign me in automaticaly. Uncheck the one that says sign you in autimaticaly. If you want to use your vidioe camera you dont need aim pro unless you have a mac then the vidioe set up process is a little for complicated