Model# 27909EE1-A the automatic answering system is not working

Enter the model of your VTech system into the box at http://www.vtechphones.com/support/general/manuals to download a copy of the manual.

You may download a copy of the user guide here.

Here is the manual for your phone. You can download the manual and the instructions for setting up your answering machine are on page 43:

http://www.uniden.com/pdf/DECT1580-3om.pdf

Setting Up the Answering System
You can set up your answering system's features from the handset. Only one handset at a time can access the answering system menus.

Note: If you have multiple bases, select the base with answering system you want to access (see page 15).

Recording a Personal Greeting
Your answering system comes with a pre-recorded outgoing message or greeting that plays when you receive a call: "Hello, no one is available to take your call. Please leave a message after the tone." You can record your own personal outgoing greeting. Your recorded greeting must be between two seconds and thirty seconds long.

Press /mute. The system announces the number of new and old messages, then starts to play the messages unless it has no messages.

Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the system is in the command waiting mode.

Press 8 to start the recording. The system announces, "Record greeting." Begin recording after the announcement.

When you finish recording, press 8 again or press 5. You will hear a confirmation tone, and your recorded greeting plays back for you.

Selecting a Greeting

Once you have recorded a personal greeting, the phone automatically switches to your personal greeting. You can
also switch back and forth between the pre-recorded greeting and your own greeting at any time.

Press /mute. The system announces the number of new and old messages, then starts to play the messages unless it has no messages.

Press 5 to stop the announcements or message playback. You will hear intermittent beeps indicating that the system is in the command waiting mode.

Press 6. The system plays the current greeting.

I hope this helps you:

Recording Your Announcement

Before using this answering system, you

should record the announcement (up to

one minute long) that callers will hear

when the system answers a call. If you

choose not to record an announcement,

the system answers with a prerecorded

announcement: "Hello. Please leave a

message after the tone."

1 Press and hold annc/skip. The system

beeps. Speak toward the microphone

normally, from about nine inches away.

While you are recording, the Message

Window displays -.

2 To stop recording, release .annc/skip

The system automatically plays back

your announcement.

To review your announcement, press
and release .annc/skip

You can get a copy of your 1717 manual at this web site:
http://www.retrevo.com/samples/AT%26T-page-2-manuals.html

Hope this helps. Good Luck, Barb

http://www.vtechphones.com/vtechui/support/manual.cfm?manualID=22050

I have model no. 1188 bellsouth digital answering machine. If you have to leave a message, the message I recorded is no longer there, there is a generic message saying please record your message. How do I go back and record my voice with my message. I cannot find my original manual.

http://telephones.att.com/docMgt/public/art/162/1717_manual.pdf

Your question is not clear enough, You can check it out in the user manual. I just guess you are asking recording your personal annoucement.

Before using this answering system, you
should record the announcement (up to
one minute long) that callers will hear
when the system answers a call. If you
choose not to record an announcement,
the system answers with a prerecorded
announcement: “Hello. Please leave a
message after the tone.”
1 Press and hold "Annc/Skip". The system
beeps. Speak toward the microphone
normally, from about nine inches away.
While you are recording, the Message
Window displays —.
2 To stop recording, release "Annc/Skip".
The system automatically plays back
your announcement.
To review your announcement, press
and release "Annc/Skip".

Turn the power off for like 10 minutes and then turn it back on. Make sure its not on fax mode, but tel/answer mode

i found this after searching the web for a long, long time.
http://safemanuals.com/user-guide-instructions-owner-manual/AUDIOVOX/AXT847-_E

http://telephones.att.com/telephones_ui/support/dsp_manuals_list.cfm

use this link to find manual