Epson LX300 page print problem

• Make sure you selected the correct paper size settings in your printing program and printer software.



• Run a print head nozzle check to see if any of the nozzles are clogged. Then clean the print head, if necessary.



• If a blank page exists in a document you are printing and you want to skip printing it, selectSkip Blank Pagesetting in your printer software.
  1. Do one of the following:
     • Windows 7: Click, and selectDevices and Printers.
     
     
     
     • Windows Vista: Click, and selectControl Panel(or point toSettingsand then selectControl Panel). SelectPrinter(underHardware and Sound) orPrinters.
     
     
     
     • Windows XP: ClickStart, and selectControl Panel(or point toSettingsand then selectControl Panel). SelectPrinters and Other Hardware(if available) and thenPrinters and Faxes.
  
  
  
  2. Right-click your printer icon, and then selectPrinting Preferences.
  
  
  
  3. Click theMaintenancetab, then select theSpeed & Progressbutton.
  
  
  
  4. In the Settings area, click on theSkip Blank Page.
  
  
  
  5. ClickOKas necessary to save your settings.
• Hope It's resolve all Your Printer Problem,
  Or Still having Problem Then follow Us ForEpson Printer Support

Check the printer settings about page length by the procedure given in the user manual.
If OK check your software if it is giving soft commands to adjust paper lengths.

Check the paper type / size options in the printer dialog box in windows.
If you are printing in character (DOS) mode. Check the predefined setting of paper length (refer you manual).
Your printing software can also define the paper size using soft codes.

solve this problem

change the fonts of the printer by pressing the font button on the panel (Refer user manual for more details)

alguien por favor envieme los drivers de la impresora EPSON LX300 les agradesco

use the com1, and use a baud rate like 9600, with 8 and 1 bit stop. dont. be sure that is in ESC/P or IBM as you requiered. if your software use directly the serial port, be sure that the bios set up is properly. i think that the lx300+ have less buffer than lx300+2
and if you use high speed, could loose info.

If you try the print head alignment or head cleaning wizard under the maintenance tab, they may help!

Hi, you may want to reset/restore the Epson LX300 to default settings. This can be done by pressing down on the FONT button while powering on the printer. If done right the LX300 will print a test page with the firmware version. It is also possible that the drivers are corrupted. In Start, Printers & Faxes, delete the LX300 printer, restart your PC and then re-install via Add Printer. In some cases, defective parallel cable can also cause problems. Unfortunately the only sure way of checking is by replacing the printer/parallel cable with a known good/operation cable. If the printer would really be requiring service, a Service Manual is available at (http://www.eserviceinfo.com/index.php?what=search2&searchstring=DPA-300) Hope this be of some help to you. Good luck and pls post again how things turn up.