How do I reset , out of box Settings for HP T3500

To solve issues visit https://support.hp.com/in-en/document/c04530811 to get quick support call our Toll-Free 1 888 224 4280

download and install BIOS and Network Driver for the system on dell site http://www.dell.com/support/home/us/en/04/product-support/product/precision-t3500/drivers

seems memory module failure , no.1 module
http://www.dell.com/support/article/au/en/audhs1/sln288786/precision-t3500-t5500-t7500-workstations-diagnostic-lights-and-beep-codes?lang=en

scroll down page to Diagnostic Beep codes

It's simple. If you still have a problem please take a look at manual in pdf file for this dell t3500. You can find it here for example:
User manual for Dell T3500

The Mazda T3500 truck requires a specific torque for its bolts. According to [1], it requires a torque of 60 pounds for the first stage, 70 pounds for the second stage, and 80 FT Pounds for the final stage. Additionally, in [2], it is recommended to refer to the STANDARD BOLT AND NUT TIGHTENING TORQUE in Section TD for tightening torques which are not mentioned in the main text. Furthermore, [3] suggests that one should check the oscillation torque of the connecting rod. If the large end does not drop by its own weight, it is important to replace the piston, connecting rod, and/or piston pin.

**References:**

[1] [Torque specs for Mazda T3500 truck - Fixya](https://www.fixya.com/cars/t18472768-torque_specs_mazda_t3500_truck)

[2] [Mazda T3000, T3500, T4000 Workshop Manual](http://www.retroanaconda.com/landrover/manuals/mazda_t3000_t3500_t4000_wsm.pdf)

[3] [Mazda T3000 T3500 T4000 Workshop Repair Manual PDF](https://ru.scribd.com/document/361910842/mazda-t3000-t3500-t4000-workshop-repair-manual-pdf)

When a vehicl is in storage for a long time and hasn't been started ,the oil drains off the gears and any part above the oil line will rust and jam up. Try removing the lock unit as the dedent ball in the unit may be rusted in the out position and not moving out of the way to allow gear selection.Don't be surprised if the gear box and diff make some noise when you drive it.

I believe it to be an EATX form factor.
Extended ATX,

http://en.wikipedia.org/wiki/Motherboard_form_factor#Comparisons

Not advertising for seller, nor website. Just more reference material for you,

http://www.ebay.com/itm/New-Dell-K095G-Motherboard-Precision-WorkStation-T3500-/400129302707?_trksid=p3284.m263&_trkparms=algo%3DSIC%26its%3DI%26itu%3DUCI%252BIA%252BUA%252BFICS%252BUFI%26otn%3D21%26pmod%3D121020255810%26ps%3D54

For additional questions please post in a Comment.
Regards,
joecoolvette

Daniel,

I have some one you need to talk to about this. Can you provide me with a means of contact?

Hello
To work around the hibernation (S4) problem, temporarily turn off the Hibernation feature. To do this, follow these steps:

1. Click Start, and then click Control Panel.
2. Double-click Power Options.
3. Click the Hibernation tab.
4. Click to clear the Enable Hibernation check box, and then click OK.

Hope this helps, if so do rate the solution.

Go to the BIOS settings and make sure the drives are recognized by the BIOS. Ensure they are set as either Master or Slave drives depending on where they are fitted.
Your OS should, once the BIOS picks them up, format as required.