Check the assy. below the image unit. Open the machine pull out the image unit below it on the machine you see a black plastic assy. with machine off press it down front and back and forward check that the very thin wire in there is Ok. Mite need to be replaced, second check the drum unit or image unit when the last time it was replaced? you might try site below see if you can get the wires and or the image unit, That's a very old Minolta machine. Precision Roller Printer Toner Cartridges Parts and Supplies Office...
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f
SOURCE: WE HAVE A MINOLTA EP1030
I really needed my copier so I took it down to the service center this morning. They are suppose to call me with an estimate. He said there are three or four different reasons the machine would show a code C-50 and he needed to look at it before he could find the problem. Thanks anyway
37 views
Usually answered in minutes!
×