Finding mirror glass replacement in projection tv

A regular mirror will not work correctly---best bet is Google the model number with "mirror" as some sell mirrors and if that fails call Panasonic to see if available, part number, cost and where to order it.

The power light keeps flashing and the tv won't turn on. If you unplug for a minute and hit the power button it sound like it is coming on then it shuts off and the red power light flashes slowly. The TV is a Panisonic 1080i HDTV, about 6-7 years old.

IC4511 isnt comunicating. Replace the DG board

tv will not come power light just flashes red

Original Replacement EUR7613Z8B EUR7603Z90

The cable to the antenna and another cable from the TV needed to be hooked up and THEN follow the directions that came along with the converter box.
Channel 3/4 and scan., be sure the antenna is strong enough.

There was no need to touch the DVD/VCR box.

go to this link for the manual.

http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=d17d8491251fb501911086409da7f697&modelid=275504&q=Panasonic+PT-47WX49

If the lamp is actually out - replace it - if the lamp is still working just reset the lamp hours - at 10,000 hours it automatically says that but it is just the lamp time needing a reset.

Misha, I have bad news for you.

There is only one part behind that screen to break - a rather large mirror.

To verify:

Lay the TV down, face down, on a towel.
Remove the screw from the upper rar black plastic housing.
Lift straight off - you should see the mirror, or what is left of it, attached to the black plastic.

Sorry for your loss.

If you are interested in selling the ballast, let me know.

Replace IC's with PANASONIC part # C5AA00000203 only...
DO NOT use generic cheap junk .......only makes the repair worse......

Terry.