Dell Printer 2155 replace PHD - Konica Minolta bizhub 161f All-In-One Laser Printer

Try cleaning the laser lenses.

Efficacious Solutions to Troubleshoot Dell Printer Error 007-340 & 007-341:
Step 1:- Cycle Power on the Dell Printer §First, turn OFF your Dell printer.
§Then wait for some time at least 15-20 seconds.
§Next, turn the Dell printer ON.
§Determine if the issue still occurs. If yes, then go to the next step.
Step 2:- To Remove PHD Unit You should try to Remove PHD Unit, by the following way to fix instant fix this issue.
For More Info Get In touch with professional to get proper solution: Fix Dell Printer Error 007-340 Toll-Free No: +1-888-633-7151

Hello!

This issue relates to an error with the PHD (Photoconductive) Unit. To resolve this error please try the following steps:

1. Turn the printer off.

2. Wait 10 seconds.

3. Turn the printer on.

4. Determine if the issue still occurs.

5. If 007-340 or 007-341 Restart Printer Error recurs please remove the PHD Unit and remove any packaging.

To Remove PHD Unit:-> Remove the Paper Tray

-> Open the front cover.

-> Put a piece of paper on the transfer belt to protect it from scratches and from light damage. Do not cover the left and right of the belt guards with the paper.

-> Rotate the four stoppers of the PHD counter-clockwise 90 degrees to release the locks


-> Remove the PHD unit toward you by pulling it by the left and right handles.

-> Lift up the PHD unit from the printer. Be careful to avoid scratching the transfer belt.

-> Remove the packing tape by pulling straight out

Reinsert the PHD.

-> Close the front cover.

6. If error recurs with the PHD Unit re-seated please try another PHD from a working 2130CN Laser Printer (if available).

7. If issue recurs after trying another PHD or no PHD Unit is available, please call Dell Technical Support to advise.

phd ?

PHD = Printer Head Device

It seems you need a new printer head.

More info. can be found here: http://support.dell.com/support/edocs/systems/prn2130cn/en/ug/sectiogd.htm#wp1189135



Hope that helps you ;)

Please Take a second to rate me! Thank You.

I believe the PHD is also called the Imaging Drum. You'll need to buy a new one to replace.

You can find them at Dell's official site:

http://accessories.us.dell.com/sna/productdetail.aspx?c=us&l=en&s=dhs&cs=19&sku=330-1435

Hi, The PHD unit is either missing or not fully inserted into the printer. Reinsert the PHD unit. See "Replacing the Print Head Device" in your printer manual.
thanks
Adam
please leave my feedback

Hi,
The PHD unit is either missing or not fully inserted into the printer.

Reinsert the PHD unit.

See "Replacing the Print Head Device" in your printer manual.

thanks

Adam
please leave my feedback

http://support.dell.com/support/edocs/software/dtk/2.4/CLI/pdf/dtk24cli.pdf look here codes are posted

On page 30 of the 1320c manual it says this signifies the coming end of the PHD (print head device). I cannot find a part number or reference to the PHD on the Dell web site pages connected with this printer