I have a Frigidaire, Electrolux washer dryer combo. The Model number is GLET1031CSO. Neither the washer nor the dryer will work unless the washer is set on spin cycle. There seems to be no power to the unit, but when the washer is turned on with the dial turned to spin and I start the dryer, they both start up and run until the washer cycle ends - then they both stop. I opened the unit up and can't find any wires out of place, but I'm pretty sure it is an electrical problem. Any ideas?
Are you connected to a 30 amp breaker w/ 30 amp wire?
Thank you for your inquiry, Caroline!
From the information you have provided your Frigidaire laundry center is no longer working. I understand that you had to shut off power to your house and now your laundry center is not coming on. It sounds like you could have a possible short within your timer. I would recommend performing a reset on your laundry center and you can do that by unplugging the power cord for roughly ten minutes. If you continue to have issues with your dishwasher can you provide me with your model number? In order to locate your model number you can find the serial tag and that should be located on the inside wall of your dishwasher. I look forward to assisting you further. -OOS
1,442 views
Usually answered in minutes!
I have the same problem with my FEX831CSO model .
Mine is also doing the exact same thing... if anyone has an idea of what I could check, I'll post back any solutions I may find. Oh, and after checking, yes it's hooked up to 30 amp breaker w/ 30 amp wire. Any other suggestions are greatly appreciated.
×