When i switch on the machine,error E000002 is comming

http://www.copytechnet.com/forums/canon/24451-canon-ir3300-error-e000002-0000-a.html

Thread Canon IR3300 Error E000002 0000

Quoting:

wilson Technician Join Date Feb 2009 Location PASIR MAS , KELANTAN

what you need to do is just resetting your machine.
1. Press * 28 * on your machine in a quick move.
2. Select copier
3. Select Err.
4. Select Clear then press O.K
5. Turn your machine off for 1 minute and turn it on again.

The error code will not be there anatmoreand your machine will be functioning well.

you need to have a driver installed on each P.C
http://www.usa.canon.com/cusa/support/office/b_w_imagerunner_copiers/imagerunner_2200_2220i_2220n_2800_3300_3300i_3300e_3300en_3320i_3320n/imagerunner_3300#DriversAndSoftware
You need an ethernet network of computers
You need to set up the ip addess and subnet mask in the printer via its setup menu . At the very least a ethernet network Switch with static ip addesses for each device , or A router with DHCP server to dynamically assign ip addresses.
you need an rj45 socket on the ir3300 which it should have 802.3 ethernet 10/100 tbase ethernet according to ir3300 specs if it is missing you need a network card to be added to ir3300 by Xerox / Cannon

ERROR CODE E000002 IR 2545

IR3300
error cords E000002-0000

SIR MY XEROX MACHINE IS PROBLEM ERROR CODE : E000002-0000

MACHINE MODEL : CANNON IMAGERUNNER 2200

this error is power related. reset the fixing error by pressing * 2 & 8 then * Go to function, clear, error switch off the machine then switch on

E002/E000/E003/E261/E733 Error code: Due to AC line noise Error Code


Symptom E002/E000/E003/E261/E733: due to AC line noise. Description E002/E000/E003/E261/E733 occur due to AC line noise.
If the above error codes are frequently recorded in the error log, they might concern AC line noise. Cause When the machine tries to detect a Zero-cross signal of AC line, it will fail if a noise occurred around the zero-cross point. Since the fixing temperature is controlled based on the zero-cross signal, there is a possibility that the fixing temperature could not rise properly if a noise occurs several times. Field Remedy Replace the Switching Regulator PCB　***'y with a new one.
120V: FH3-2613
220V/240V: FH3-2614
The circuit has been modified to resist a noise. REMEDY Caution
　Press (* then 2 and 8 together then *)you are in service mode monitor:To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR.

GOOD LUCK MATE ......KINDLY RATE ME !!!! THANKS.

E00002

sir,

sub:- display error (e000002-0000)

give me solution display ravalante emicheyali cheppandi.

My canon iR3300 is displaying error code E000003-0000. Please help