Month date time on hp6310

To Set Date & Time on a Xerox 3635
Press: Machine Status (hard button)
Press: Tools (on touch screen)
Press: Device Settings (on touch screen)
Press: Set Date & Time (on touch screen)

The machine will have tabs at the top

Press: Set Date
Press: Month
Enter the Month: (Using the hard buttons)
Do the same for Day and Year
Press: Save

Press: Time
Same procedure as above setting the Date
Press Save

Turn the machine off and back on for settings to take effect.

Improve the FixYa experience for everyone by voting!
Hi,
If you have the HP6310 All-In-One, click on the following link for the diagnostic tool: CLICK HERE
If that didn't solve you problem, click on the following link for the Microsoft diagnostic tool: CLICK HERE
All the best, Ben

First of all, congrats, you are using one of the best printer on the market.
For HP Officejet 6310 :-
To set the date and time
1. Press Setup.
2. Press 6, and then press 3.
This selects Tools and then selects Date and Time.
3. Enter the month, day, and year by pressing the appropriate numbers on the
keypad. Depending on your country/region setting, you might enter the date in a
different order.
4. Enter the hours and minutes.
5. If your time is displayed in the 12-hour format, press 1 for AM, or 2 for PM.
The new date and time settings appear on the display.
--
And, you can also download it's User Manual from :-
http://h10032.www1.hp.com/ctg/Manual/c00633922.pdf

Hi,

Please check the date display format

In your mobile it might have set to this format

MM DD YYYY

So as the first column is in months as you enter 24 it doesnt accept and shows 02 ,This is because you have only 12 months in a year.

So please type month date and year.

If you want you can change the format to DD MM YYYY in date and time setting option.

Thanx


Thanx

1. Press Setup.
2. Press 6, and then press 3.
This selects Tools and then selects Date and Time.
3. Enter the month, day, and year by pressing the appropriate numbers on the keypad. Depending on your country/region setting, you might enter the date in a different order.
4. Enter the hours and minutes.
5. If your time is displayed in the 12-hour format, press 1 for AM, or 2 for PM.
The new date and time settings appear on the control panel display.

hey try to add month date and year
this is the procedure
month/date/year
enter it

Here's the instructions on how to do that :
Quick Instructions on Setting the Date/Time:

1. To set the current date and time, press and hold down the SET/EDIT button for a few seconds. Release the SET/EDIT button when the Month (M) and Day (D) indicators start flashing.
   Note: The unit will revert back to normal display if no other key is pressed for 10 seconds.
2. While the Month (M) and Day (D) indicators are flashing press the LOCK button to cycle through the 3 available date formats.
3. Once you have chosen an appropriate date format press the SHIFT button to switch between each of the different DATE, MONTH, YEAR, HOUR, and MINUTE fields. The field that is currently active will start flashing. To change the field's value press the LOCK button. Each stroke of the LOCK button moves one value up.
   Note: If you go past the current year, you will need to press the LOCK button to cycle through the year 2189 and back up to the current year.
4. Once you are finished setting the Date and Time press the Set/Edit button to return to the normal display. The Date/Time Stamper is now ready to print.

The manual for this device can be found here :
http://images.cableorganizer.com/dymo-label-printer/DateMark_Time-Manual.pdf

At the top of the keyboard are the LCD function keys (F9 - F12). Press and hold the function key (FN, next to the left alt key) and press F10. Use the up and down arrows to change the time. Press FN + F10 again to change between hours, minutes, month etc.

Describe your problem: Depress MONTH/DATE and ALARM1 for 3 seconds and display will show DST 'start' month,week,and date.
Display will show 4F 4.1, alternately flashing

4F = April First week. 4.1 = April 1.That is the old dates for change. What we want to do is to change to the new dates. Once it is done, it will change in the new dates as it did on the
old dates..

Hold down the MONTH/DATE button for 5 seconds, and while pressing the - or down button3 times, until the display shows '3'F2.
3 is month F2 is the week.
=March 2nd week.
You have successfully change the March changeover.

Now for the November change.
Depress and hold MONTH/DATE and ALARM2 after 3 second the display will show DST 'end' month,week, and date.
First digit will be 10 =month. second digit will be L=Last week, and date, will flash alternately.
While holding down the MONTH/DATE press the + or UP button once the display will show 11 (November) and F (first week) and 1 as date alternately flashing.
You have successfully set it for the next 100 years

Set date and time;

• Press User Tools/counter button
• Press 3 for Fax

The Facsimile User tool main menu appears.

• Press the number 6 for Key Op. Settings and press the hash key within 3 seconds.
• Press 18, Date and time or next until it shows.

Select month, date, year or time with arrow buttons,
enter the month with Prev. or Next and enter the correct time and date.
Press OK > PrevMenu > User tools/counter button.

Good luck and please rate me, thanks.