Hmdx eclipse alarm clock's alarm stopped ringing

Make sure the out door sensor has fresh batteries, and that the clock inside is close to the location of the sensor outside so they can connect. If none of that works, time to replace the unit.....

Make sure u hv right time set.
Then go to Tools> alarm clock>new alarm> name>enter time for alarm to ring>select alarm alert tone> set volume..
NOTE: Yo handset shld be in 'Loud' ring style not silent

How to turn off alarm so it won't go off in the morning. Hmdx flow alarm clock

On my Elgin alarm clock, you just push the nap button and it will add 15 minute increments for a nap. I haven't figured out how to turn it off if I change my mind or wake up earlier than I set it.

when you set the alarm make sure that you scroll to the bottom and in the preferences you can choose to make it no minutes before for up to 24 hours. this usually happens when you use the calendar alarm instead of the phones alarm

Daylight savings time.

Turn the alarm on, then when the alarm rings, just make a noise, say a word, grumble or clap hands and it will stop ringing for 8 minutes, then start again. If you need to yell louder to make it stop, that's an indication that the battery is going dead.

what you can do is go to ringtone settings and assign a specific tone to it....and then test it

LG services recommends resetting your phone to solve this problem.
Good luck

The solution is a follows; If you have any legit alarms already set, disable them before proceeding

1) As soon as the unwanted alarm goes off , look at what time your phone says it is and make a note of it. (if you know EXACTLY what time it goes off at, then go to the next step)

2) Goto Start -> Clock & Alarm -> Alarm

3) Set the alarm time for the exact time from step #1. Set alarm to On.

4) Click Done, done, and done

5) Goto Start -> Clock & Alarm -> Alarm

6) Change the alarm to Off.

7) Click Done, done, and done

That's it, the alarm should now be disabled for this unwanted alarm, if you have multiple unwanted alarms, repeat this procedure for each.