Where can I buy a wooden shape sorter? - Toys

You can try these Noah's Ark shape sorters available on Amazon that are shaped like animals.
http://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=shape+sorter+for+kids+noah%27s+ark&rh=i%3Aaps%2Ck%3Ashape+sorter+for+kids+noah%27s+ark

or this clock shaped sorter: http://www.amazon.com/Melissa-Doug-Wooden-Shape-Sorting/dp/B000GKATU0/ref=sr_1_1?ie=UTF8&qid=1361430533&sr=8-1&keywords=shape+sorter+for+kids
Definitely not your run-of-the-mill circle in the circle hole shape sorter. Hope I helped!

Try these sorters available on Amazon. They are all under $25 and have received high ratings on the site:
http://www.amazon.com/s/ref=sr_nr_p_36_0?rh=n%3A165793011%2Cn%3A!165795011%2Cn%3A196601011%2Cn%3A196613011%2Cp_n_feature_four_browse-bin%3A3480743011%2Ck%3Ashape+sorter%2Cp_72%3A1248963011%2Cp_36%3A1253560011&bbn=196613011&keywords=shape+sorter&ie=UTF8&qid=1361430662&rnid=386491011

Prices for wooden kennels really vary depending on the of kennel you buy and the quality of the wood. On the Bits For Pets website, the prices vary but range generally between 100-200 pounds sterling.

Hi:
You directed this question at me, but unfortunately this isn't my expertise and I am unable to provide you with a real solution at this time.

Hopefully one of other experts will be able to provide you with a real solution.

Thank you for using FixYa.

Please go any hibby shop.You will get guidence.

All Cob codes on this series of Minolta copiers pertain to the sorter. Most all of the time you can simply open and close the sorter to reset the code. By open and then close I mean that the sorter must be pulled away from the copier then closed back.
Make sure there is nothing interfering with the movement of the sorter bins.
If opening/closing does not reset the code or if the code comes right back after resetting then the sorter will need service as dis-assembly/repair/re-assembly will be required. You can also unplug the large connector going from the sorter to the machine and use the copier without the sorter. If you have a 10 bin sorter that "hangs" from the side of the machine then you can leave the sorter attached and it will work fine unplugged. If you have the 20 bin sorter that sits on the floor then the sorter will have to be moved away from the copier if unplugged to prevent the machine from jamming. If you unplug the sorter be sure to turn the copiers power off before disconnecting the sorter.
Good Luck and Thank You for using Fixya.
WheatlandService

F1 00 Content Sorter communication trouble Detail Communication line test error occurs when power is turned on or after the exit of a simulation mode. Improper communication with sorter Cause Improper connection or broken wire of connector or harness between copier and sorter Sorter control PWB defective Control PWB (PCU) defective Malfunction due to noise Check and remedy Clear by turning the power supply OFF/ON. Check communication line connector and harness. Replace sorter control PWB or PCU PWB. F1 02 Content Sorter transport motor error Detail Transport motor drive trouble Cause Motor lock Check and remedy Check transport motor operation with SIM3-3. F1 03 Content Sorter guide bar rocking motor trouble Detail Sorter guide bar rocking motor drive error Cause Motor lock Motor speed error Overcurrent to motor Sorter control PWB defective Check and remedy Check guide bar motor operation with SIM3-10. F1 04 Content Sorter indexer lower limit detected Detail Indexer has exceeded lower limit. Cause Sensor defective Sorter control PWB defective Check and remedy Check sensor with SIM3-2. F1 05 Content Sorter indexer upper limit detected Detail Indexer has exceeded upper limit Cause Sensor defective Sorter control PWB defective Check and remedy Check sensor with SIM3-2. F1 06 Content Sorter bin shift motor error Detail 1) Bin shift is not completed within 2.5 seconds after bin shift request Cause Motor lock Improper motor speed Overcurrent to motor Sorter control PWB defective Check and remedy Check bin shift motor operation with SIM3-4.

loks to me like you have a problem... serious problem might be time to go buy a new machine. i know of the best place to get a fully functional machine. GUARANTEED (858) 292-4129 KCDS/BMU www.bmusd.com

Sounds like the sorter connection between the two is poor or disconnecting, check the cable from sorter and power lead to the sorter are secure.

Check switch that machine uses to know when sorter is engaged is closing proberly/not bent

Check sorter indicator lights (if any) after reboot,

Try running lead to it from elsewhere in case there is too much drain or something weird with power supply where you are