Amt battery replacement - Precor AMT 100i Adaptive Motion Trainer Elliptical - Refurbished

How could you, except by contacting AMT?
Failing that, how does your search engine of choice fail to find a substitute?

John Deere AMT 626 and Kawaski 175 - YouTube

? 4:49
www.youtube.com/watch?v=M2ZcIAMySpI
Jun 28, 2012 - Uploaded by pupbiking Just had a AMT given to me so will work on restoring it lucky it runs after some work ... John Deere AMT 626 and Kawaski 175 ... I tightened up the belt and the chain, Wondering what your chain looks like at the tensioner? ... check out my next video on the amt i got it all done now i did adjust the tensioner so ..

https://www.youtube.com/watch?v=ovimPXkESJ0

Her is a video of them putting it together. Maybe that will help you.

List of Error Codes for Precor Fitness Equipment

• Precor has standardized their error code messages across all their equipment so that each error will have the same meaning regardless of what model or equipment type the message appears
• Here we list each error so that you can click through the specific error for additional details about the cause and action to correct the error
  • E2, Lift Error
  • E4, Incomplete Initialization
  • ERR, EEPROM Problem
  • Error 00, Memory, RAM, EEPROM Test Error
  • Error 01, Memory, RAM, EEPROM Test Error
  • Error 02, Memory, RAM, EEPROM Test Error
  • Error 03, Memory, RAM, EEPROM Test Error
  • Error 04, Memory, RAM, EEPROM Test Error
  • Error 05, Key Depressed at Power Up
  • Error 09, Lower PCA Memory Test Error
  • Error 10, Line Frequency out of Acceptable Range
  • Error 11, Watchdog (Upper PCA)
  • Error 12, Watchdog (Lower PCA)
  • Error 13, Fan at Incorrect Speed
  • Error 14, Fan Fail
  • Error 15, AC Input Voltage Too High
  • Error 16, AC Input Voltage Too Low
  • Error 20, Too Many Maximum Power Request in 1 Second
  • Error 21, Too Many Maximum Consecutive Power Requests
  • Error 22, No Motor Pulses at Start Up
  • Error 23, Motor Pulses Missing after Start Up
  • Error 24, Reduce Speed Requested, Speed is not Reducing
  • Error 25, Motor Pulse Count over Acceptable Limit
  • Error 26, Motor Pulse Width Incorrect
  • Error 27, Too Much Drive Motor Current
  • Error 28, Temperature Too High
  • Error 29, Excessive AC Input Current
  • Error 30, 31, 32 and 33, Communications Error
  • Error 37, E-Stop Not Working
  • Error 40, No Lift Motion Detected
  • Error 41, Lift has not Responded in Acceptable Time
  • Error 42, Lift Position Value Out of Range
  • Error 43, Zero Switch not Found
  • Error 44, Un-commanded Lift Motion
  • Error 45, Lift Moving in Wrong Direction
  • Error 46, Low Battery Voltage (AMT12 Only)
  • Error 50, Too Much Brake (Magnet) Current
  • Error 53, Can't Read Target, Can't Find Home Switch
  • Error 54, Target Pulses Lost During Operation
  • Error 55, Brake Home Switch Activated Unexpectedly
  • Error 60 or "Temporarily Out of Order", Auto Stop Not Working (TRM Treadmills)
  • Error 61 or "Temporarily Out of Order, Auto Stop Not Present" (TRM Treadmills)
  • Error 62, Vertical Sensor Failure (AMT12 Only)
  • Error LS, Speed Sensor Signal Missing
  • Error 70, LPCA Not Read
  • Error 71, Blank LPCA
  • Error 72, AMT LPCA Version Unknown
  • Error 73, AMT LPCA Record Bad
  • Error 74, Refurbished Head
  • Error 75, Refurbished Head
  • Error 76, AMT Head Stride Count Less than the LPCA
  • Error 77, AMT UPCA Stride Count Greater than the LPCA
  • Error 78, AMT Belt Replacement Warning
  • Error 79, AMT Belt Replacement Required

Error Code List for Precor Fitness Equipment

Go into the Bios and disable the boot option to start via network.

To enable edit Company Name
1. Key turn to PGM
2. Press [5] [Subtotal]
3. Press [3][2] [Subtotal]
4. Press [4][2] [CA/AMT TEND]
5. Press [Subtotal]
6. Press [3] [Subtotal]
7. Press [2][1][2][2] [Subtotal]
8. Press [1][7][7][0][7][0][0][0][0][0] [CA/AMT TEND]
9. Press [Subtotal]

Edit ur company name
1. Press [2] [Subtotal]
2. Press [1] [3] [2] [Subtotal]
3. Input Your first line of Company Name (Max 16 Characters)
4. Press [00] [CA/Amt TEND]
5. Press [2] [3] [2] [Subtotal]
6. Input Your second line of Company Name (Max 16 Characters)
7. Press [00] [CA/Amt TEND]
8. Press [3] [3] [2] [Subtotal]
9. Input Your third line of Company Name (Max 16 Characters)
10. Press [00] [CA/Amt TEND]
11. Press [4] [3] [2] [Subtotal]
12. Input Your fourth line of Company Name (Max 16 Characters)
13. Press [00] [CA/Amt TEND]
14. Press [Subtotal]
15. Key turn back to REG1
16 Done

ATN Night Scout Night Vision Binocular OpticsPlanet com

Atn Night Scout User Manual

Pusedo is as follows

/get the cost of them items and add it to the total
when no onter items are found exit loop
if there are items continue loop //

item = y
total = 0
do while item = y
total = item + total
get cost of new item
if cost = 0 then item = n
loop
Print "BILL TOTAL = " + total

// minus discount
enter discount amt (in %) as da
discount = (da/100) * total
total = total - da
Print "DISCOUNT = " + discount
Print "new total " + total

//add vat
vat = (12/100) * total
total = total + vat
Print "VAT " + vat
Print "new Total " + total


//get pay
enter amt paid as amt
change = amt - total
Print "Paid " + amt
Print "change " + change

Print THANK YOU FOR SHOPPING AT FIXYA

I have a Amt aries 208 I have changed the battery but i cant get to do any thing . and i have lost all of the manuals can you help.Ed.