Iam not remembre the username and passworld i want username and passworld preicipal i have the same problem my colubris cn3200 WLAN Access Point/controller. im in a computer course and we where given it with no info and we need to reset it to be able to get it configured(reset secuence) stardard admin/admin mane and password does not work. if enybody knows enything about it thank you

No, it's a pure access point, not router. It sends, or broadcast, a SSID, it won't be a client and attach to a network. The Apple Airport express does that though.

What is the make and model of your PC?

Hi,

Welcome to FIxya. If you need you Security Key or Password (Network Key) on your router you need to access the Wireless Settings Page. To access the router page you need a working computer that is connected to the router. To access the router page just open a browser then type 192.168.0.1, the Default username is admin and the password is blank. Go to the Wireless Settings and you'll find the Network Key or Passphrase (Password). You can alsoThen Personalize you Network Key or Passphrase so that you can easily remember it. Then WLAN Access point is the Network Name or SSid which is myquest3677

Thanks for using Fixya.

Contact us for advanced configuration and tech support for these, we have 8 years experience with Colubris/HP and have installed, managed and operated over 2000 hotspots with this device.

I looked at www.diplodrivers.com and could not find currnet colubris / HP firmware...

Regards
Murray
http://wireless.deepcoolclear.com/

Hi Sivakumar133,

Some reasons why wifi stops working is due to corrupted driver or defective WLAN card. There are some ways on how to diagnose this problem, just reinstall the driver and configure it again with the wireless access point. You can download the WLAN driver for this particular system by visiting this link. You will notice that on the Networking Wireless LAN section it has 2 types of WLAN card, Broadcom and Intel. Just try to install the Broadcom driver because this is compatible with XP. If you're not sure what is the model of your WLAN just check it under device manager and look for Network adapter. After downloading, install the .exe file then restart the system. You can now configure again the computer to your router.

Hope it helps.

Thank you for using FixYa.

Hi, in BlackBerry Curve 8900, there're actually two browsers available, only if the BlackBerry Internet service is active.
One of the browser is meant for accessing via WLan. & the other for BIS-B service. + an additional Browser relative to the Network provider will also be available.

So check whether the WLan browser is not accessed.
Your BIS-B service might be active since you're getting the network connection in Opera mini.

Please check which browser is accessed & then try.

Regards
Vineeth K.

You could try "admin" as the username and "password1" as the password, or "admin" as the username and no password. If neither of those work, you might have to contact Linksys tech support.

Once you get into your router's settings, there are several things you can do to limit access to your router. The first thing is to change the default password. You can also change your network name (SSID), enable MAC filtering, or turn on WEP, WPA, or WPA2 security, depending on which options your router and computers support.

Hi Friend,

Type 192.168.1.1 in the address bar of the Internet Explorer and hit enter. Do not type anything in username and type admin in password(only if you have not set the router password).

Now click Access Restrictions tab. Click Enable and restrict the acess according to your need.

Regards
Chiranjeet

PW and User of What?
WLAN network. or Router?
Model?
do you get radio signal?
Do you see your Wlan?
Try my tip

If fresh out of the box or newly reset
connect power to the device and connect network cable from device to our computer.
open web browser and type http://192.168.1.245
username is null
password is admin

Here is manual