REPLACED BULB WITH NEW ONE,,WORKED FOR 3 DAYS THEN OUT AGAIN THOUGH THIS TIME WHEN CHECKED THE BULB IT SEEMS OK...STILL THE SET WILL POWER UP SOUND..NO PICTURE...FOR 5 SECONDS THEN NOTHING BLANK THE GREEN LIGHT STAYS GREEN FOR 60 SEC THEN TURNS RED AND FLASES RED
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
3 blinks indicates lamp door is not on or has not been reinstalled properly. This also could mean the lamp door switch has failed itself. Try removing the lamp door and putting back on, if that doesnt correct the problem then I recommend having the switch replaced.
Seen this happen before, A guy had bought a brand new jeep cherokee, the second morning it would not even crank or turn the motor, he had a faulty key switch, could be your problem as well...
You didnt list the type of car this is, the most common thing that causes this is the starter, i just had a saturn, the customer had the same problem we told her it may be the starter but cant be 100% sure until it actted up, she didnt want to replace it unless we were sure, so we kept and drove the car around for 5 days and finally the last day it didnt start and it was the starter , same problem turn key and nothing no noise and no start, i would have the starter replaced and go from there, its a mater of time before the car just wont start,hope this is helpful.
I have a 2001 saab 93 and battery will need a jump in the morning but battery is new. I found a small fuse box next to the battery with 4 60amp mega fuses in it and when I remove the 1st 2 fuses the battery will be ok in the morning? can someone help
do this. press and hold device and menu button on set for 5 seconds. this will retrieve a 2 digit error code .. the led will flash the first digit and pause the flash second digit. This unit is known to have capacitor problems on the power board. getting to these capacitors involves taking alot apart. let me know error codes and we can continue troubleshooting
No power at all, not even for a second. this happens all the time, it usually comes back days or weeks later, it has been over a week now and nothing. I have replaced the power cord in the past when this happened, when the computer starts up again the older power cord will work again??
Thank you for your quick response.
pl
Buzzing is usually a fan, like one in the freezer, or back bottom - for cooling the freon. The compressor over-heat usually will make a single click (off) and a few minutes later a click (on). If the fan in the freezer stops working well, the freezer will frost up and the fridge section will not be cold enough.
Please intimate exact model name of Sony TV and also mention what was the symptoms that you replaced Lamp (bulb).
×