PHONE SIG ERROR Battery is Very Low - Motorola Mobility RAZR V3i Cellular Phone

This problem is being caused by a switch called the multifunctional switch. This switch is located in the steering colum . This switch controls the wipers ,turn signal and low and high beam. Replace the the switch and this should fix your problem. FYI check the connectors that go to the switch for burn marks. If burned repair the connector also.
Hope this helps ! Mr Toofix.

hello sir

Follow THIS THREAD

http://modmymobile.com/forums/10-razr-v3i/3602-v3i-phone-code-sig-error.html

I Charged the battery up using another motorola phone,and then I did a software upgrade, and this has fixed the problem.The phone is working great now,all photos or videos were saved.
What i think caused this error is that the phone was doing an upgrade and then I got a message at the same time,I think these clashed some how and prevented the upgrade from completing,hense causing an error on the boot loader.

Hope I helped

Chris

Stuck in a bootloader mode ,the V3i won't charge. Get hold of another v3i nad replace to charge own battery . after that place this charged bty in your stuck v3i and reflash with a MP that works (the last one u tried probably won't get loaded so get a fresh one)

I don't know what program you were using to upgrade, but it seems that you did not have enough charge on your battery. Try to charge you batery fully with another phone or get a hold of any other V3 phone and use their batery. Then press the * & # together and press the on/off button. it should take you to the boot loader mode. At this time the computer and updater proram should recognize your phone. But I do not know what program you are using.

if you stopped flashing your phone in mid process, then you may have to send it in to be done manually.

or you can try holding *and # when you turn it on to access the boot menu and see what happens

take the phone and have the phone reflash and have it fix

The phone has to be taken to a mobile service center and have them flash the phone for you.

phone sig error mean your Phone MonsterPack(software) is demaged. you need to flash back using RSD lite to make back to normal. give me what software version you have on your cell and what bootloader you have..eg.bootloader 0A.30/0A.52..SW:R479 and etc. i these so i can upload one for you