Need to connect NT8B60CA SAP to M7324 CAP module

Huawei S5700-28P-PWR-LI only can be equipped with AC 110V-220V power supply.Only Huawei S5720-28X-PWR-SI, S5720-52X-PWR-SI, S5720-36C-PWR-EI, S5720-56C-PWR-EI can support Huawei PDC-650WA-BE (650W DC PoE module)

Detail: http://img.router-switch.com/media/wysiwyg/pdf/Comparison_of_Huawei_S5700-LI_SI_EI_and_HI_Series_Switches.pdf

Your expansion box is a CAP (central answer position) module. I will assume you are using the same jack as before. The line cord, from phone to jack should be 6 conductor (count pins on end). A short line cord runs from back of phone to back of CAP (plugs on CAP are labelled) then the longer cord runs from CAP to the wall jack.

Your video ran out. Anyway, you could try using an adaptor so your iPod will sit on your music box. If that fails, connect via your aux lead, gently pull your aux lead out of the back of the box gently and slowly giving it a wiggle, you might make the connection. Other than this, as you've not provide enough footage, you might need to buy a new aux cable that fits. Not all products are compatible with iDevices, you should check the instructions to see if your model of iPod is compatible.

On the cross connect do you have a CO connected to that line. That is most likely the cause of no dial tone. If you don not know how to check that call a phone system expert to connect and verify your system.

Yes, that is a "digital" deskphone.
Unplug the phone cable for a full minute and it will reset when you plug it back in. Reset does not mean that it will erase your programming. The programming is on the main phone switch.

No, don't automatically assume the mobo is broken. Look closely at all the pins. There should be a 4x2 rectangle of pins, maybe coloured. They'll say things like 'PWR-SWTCH' and 'çPU-LIGHT'
Connect those up, and your mobo manual should have specific details on what goes where.

A separate power supply is needed to run the CAP unit. Was there one installed or did the CAP just get plugged in?

Actually i haven't fixed the problem as yet but i did find some info that would help me to fix problem.
I went to google and entered keyword,,, Electronic parts,,there came up a page,,and i went to several manuf sites till i found a replacement transformer,,then i disassembled the power supply and am now waiting for a replacement transformer.