Hitachi projection tv digital channel problem

Bob, If you have an hd ready tv, and hooked up the Ant. then the next thing you should do is go to your menu and select the tv feature and then scan for channels. This should program the channels for you. Most TV setups are like this. You should have a option for cable or antenna/tv input. select Antenna. You r should be good to go once the channel scan is done.

Hope that helps
Dan

The tuner in that unit is analog ntsc and so you need a digital converter for it.

If you have a HD TV then you do not need a converter box, however you will still need an antennae to receive the channels. the antennae can be hooked up directly to you're HD tv.

3.3 ohm/ 1 watt / metal oxide. HIT p/n: AT03202S -- red hor. conv. -- from IC ik04 (STK392-110/150)

go into the menu and turn your closed captions off or if there is a cc button on your remote you can turn it off that way.

This TV will need a converter box. It was made in the days before the digital tuner was required on big TV sets.

Just remember the converter is only needed if you get off-the-air reception with an antenna for local channels. If you have cable or satellite and get your local channels that way, you don't have to do anything. The change to digital will not affect you.

If you are now using rabbit ears or an old worn-out outside antenna, you might think about upgrading your antenna when you get a converter box. Signal strength is very important with the new digital broadcasting. Too weak a signal means no picture at all or one that freezes up or turns blocky. The antenna that worked for analog may not be adequate for digital.

The problem is the signal strength receiving from the antenna. You may need an outdoor antenna to pick up the digital stations.

You Dont need one your set is HD. So when the switch happens you are good to go. The only TVs that are going to need converter boxes is those who do not have HD or only have antenna.

http://www.shopping.com/xPF-Hitachi-46F500
HDTV-Ready - Requires separate receiver to view HDTV signals.

I cant get all my channels on my tv. I do my channel scan but all i get is 13 channels