Final Cut Express 2 won't Panasonic PV-GS320 minidv camcorder

http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS320.D#ts try this link. there are a few downloads there that might be what you are looking for.

The driver you will need to download to the PC then execute to make it work is at the link here ok.
Bye
David
Lowestoft
http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS320.D#ts

Yes get your camera drivers here
http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS320.D#ts

You are going to have to check that your firewire is being seen by windows 7 first of all. If not you will need to rectify that.
When you do get it to recognize it, here is a link for an update to the program that came with your camcorder for it to work with Windows Vista but it should also work for Windows 7.

http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS39.D#ts

Hope this helps,

LCD cable is damage so that lcd is white it need to replace

http://service.us.panasonic.com/OPERMANPDF/PVGS320-MUL.PDF

Download your XP driver from
http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS320.D
Please rate this solution. Thanks.

Hi,
You can download the operating instructions from the following link:
Panasonic PV-GS320 Camcorder
http://service.us.panasonic.com/OPERMANPDF/PVGS320-MUL.PDF
Hope it helps

Hi, I think the PVGS320 has an external mic input. Plug in a 3.5 mini dummy jack and that should turn off it internal microphone.

Canon camcorders have a non-standard head position. Borrow a panasonic or samsung camcorder (those two are compatible) and backup your casettes on dvds. If you want them to be on minidv readable on canon camcorder, connect it afterwards and send video to minidv through your camcorder. It will then be alligned the way that suites your gear.

Either that or go to the professional service that does conversion from minidv tapes. That usually costs around 15$ per hour, so if you have 10 or more hours of video, the less expensive way is buying an entry model of panasonic camcorder.