Jacuzzi commode perfecta swp1-swp2 - Jacuzzi BK37959 White Era?? Two-Piece Elongated Toilet BK37

Handle retaining nut either came loose or broke off. Check the flapper valve, if its not completely closed water will keep running out, and fill valve will stay open trying to fill the tank.

If you have to jiggle it it usually means the chain is longer then it needs to be so its getting caught on something, the jiggling just loosens it. Look inside when you flush to see whats happening. Metal chains also get wound up when too long and the same thing happens.

shut off water supply. flush toilet. There will be a little left .You can vac out with shopvac if you must.

keep going...i mean disconnect the supply line from the fill valve, hold the line into a bowl/bucket and slowly turn the water on. is there pressure? sorry for delayed response if you text me back i will try to answer expeditiously:)

I would just use the one from hardware store. nothing special about the wax from the manufacturer except the price...

be sure to do a thurough cleaning on the bottom of the toilet and make sure it is dry before you install new wax ring or it will leak.
you can actually use a hair dryer or set it in the sun to soften the wax ring, don't melt it, just soften it. makes a much easier time when setting the toilet down onto the wax.

You can find it on amazon. take a look here Modern Shower Doors at Amazing Prices . enjoy

The complication here is that Jacuzzi does not make toilets anymore than Sears makes refrigerators. In Sear's case their Kenmore refrigerators are from Whirlpool with the Kenmore name.

It is my understanding that Eljer was the manufacturer of the toilets with the Jacuzzi name typically sold at box stores. With that as a starting point, surf the web for any Eljer toilet tank replacement parts and see if you can find a similiar flusher

1-800-891-0896 http://www.efaucets.com/f/jacuzzi-ez33-959.shtml

Check this web site out I hope it will help.

They only need to be tight enough to sufficiently seal the donut between the tank and the bowl. Some movement is acceptable. It is better to be a little loose than to overtighten them and risk cracking the tank.