Using D-Link DPH-50U with a softphone ie. Xlite,eyeBeam, etc

http://www.dlink.com/products/default.aspx?pid=DPH-50U&tab=3

Click on Support Resources, Pick your country and download a manual or driver, everythings there

In your VoIP monitor settings there are two options to make your phone connect to voip. You either have to dail # # or # *. I would try hitting pound twice, but it's kind of tricky because sometimes when the dlink tries to connect it will flip back and forth between voip and pstn. So I recommend holding the phone to your ear and hitting # until you hear that dial tone!

See http://www.dlink.com/products/default.aspx?pid=DPH-50U&tab=3
for product documentation, including a quick install guide.

Errors / Solutions (Error 408, 401, 503 / Not Connecting / Failed to Register / Audio Problems):

You can try using port 8891 or 80 setting if 5060 port is blocked

Simply change the sip.tpad.com settings in Xlite to

sip.tpad.com:8891
or
sip.tpad.com:80

Use our STUN Settings, simply use the info on this link (stun.fwdnet.net:3478)
http://forum.tpad.com/viewtopic.php?t=617

http://www.youtube.com/watch?v=ugHwkl--zhQ

Use these other Free Softphones with Tpad:
http://forum.tpad.com/viewtopic.php?t=623
http://forum.tpad.com/viewtopic.php?t=864
http://forum.tpad.com/viewtopic.php?t=657
http://forum.tpad.com/viewtopic.php?t=456

please call dlink tech support at 877-453-5465. just an advise on how to handle the call when you reach dlink tech support (agent); do not agree to call back after you troubleshoot with them (they'll be giving you a case id reference# and be advising you to check your pc or call "who" and call them back to continue the troubleshooting). insist to the agent that he need to resolve the problem asap (by the way, agents are not allowed to drop the call or they'll be dead-history!). and if the agent still insisted you to call back, ask for a "senior level technician" to finish the job (escalate the problem).
fyi: dlink tech support handling time to resolve a call is 15 to 18 minutes only. if you reach that 15-18 minutes (max) time the agent will think of a way for you to call back (advising you to check with your pc manufacturer, check with your ISP, call microsoft to update your software, etc... non-sense!) they need to do this in order to reach their handling time (agents need to reach 21 to 25 billable calls, and billable calls are "solution provided", "resolved", and "dropped call"). ---- believe me, i was one of them and repented.

http://www.dlink.com/products/support.asp?pid=466#drivers
hear is the vista driver

To solve a problem "device not present", you must delete registry key "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{55280429-413e-460f-a31a-e19314823119}\0001" and restart service "VService".

I had the same problem. I just reinstalled the hardware manually through the install new hardware module in XP. Once I did that, Skype "saw" the D-Link adapter.
'I went into "add new hardware" clicked "yer, hardware is already installed" then selected the D-Link device that will be listed. You have to have the driver already installed, then let the OS install the hardware as it always does and then you should see the D-Link driver as one of the choices.

This drove me crazy too. I hope this works for all of you. Good Luck.

Did you read the manual?

first you press ##
then you will hear a weird buzz
then you dial 00 and then the phone number including the country code (example in canada.. you will do 00 1 450 419 0000

then you press *

so again,

## (weird buzz) 00 1 450 419 0000 *
and wait few seconds