Lost cd I lost my Cd to my printer Lexmark X3550 and I'm trying to down load it to my new lab top. How can I get or down load it for free?

Please visit the Lexmark website to download and install the Lexmark X3550 Printer Driver on your computer. Select your operating system > download > execute the file. Follow the instructions on your computer screen.
For your other concern, if you're willing and physically able, you may also turn the printer over. Any debris should just freely roll out from the feeder.

You can download and install the Lexmark X3550 driver by visiting the Lexmark website at http://bit.ly/h111OH. Select your operating system, download and execute the file. Follow the instructions on your computer screen.

Lexmark has the drivers on their website.

Visit:http://support.lexmark.com/index?

Then Search lexmark X3550 All-in-One printer

From the manufacturer's web-site:

http://support.lexmark.com/index?locale=en&segment=SUPPORT&startover=y&userlocale=EN_CA&question=x3550+&productCode=LEXMARK_X3550&page=answers&detectedProductFacet=CMS-CATEGORY_REF.LEXMARK.PRODUCTS.ALLINONE.LEXMARK_X3550&searchid=1262310439280#3

download the device-driver for your specific operating system.

You can download the printer software from this link so you can reinstall the printer back.....

http://support.lexmark.com/index?page=recommendedDownloads&locale=EN&productCode=LEXMARK_X3550&segment=DOWNLOAD&userlocale=EN_US#2

Hi though you dont have the CD here is the driver to download find the link below its the driver for your Lexmarkx3550 this driver is compatible for both XP and Vista

http://www.downloaddelivery.com/downloads/cpd/cjb3500-4500en.exe this link is from lexmark website ..

thats the content of you CD Driver and Applications

You can down load the software here at there site.
http://search.lexmark.com/printer/US/en/17K0000
Good luck

It’s not uncommon for software to mess up during installation.
Or even have a bad CD. (Please make sure you're windows XP software is up to date, run windows update service).
Since you are able to get into windows, open control panel, open add/remove programs & uninstall the Lexmark printer software. After uninstall restart the PC. Power on the printer before windows loads. See if windows runs with the printer connected & powered on. Less Its driver software. Windows should see the printer & ask for the software. (If so, it may be corrupted software). Go to Lexmark for driver software & download it.
http://search.lexmark.com/printer/US/en/1410000
Try reinstalling using the online driver software for the X3550 printer. If it still stops you're windows, I would suggest replacing the USB cable. If replacing the cable does not help & windows does not load, there could be something wrong with the printer.
If this is a new printer you should contact Lexmark.
http://support.lexmark.com/static/229-1-0-582.html
Lexmark will suggest all of the above. You'll be three steps ahead of support. Lastly, I have come across an issue from time to time installing printers software into Windows XP systems.
(It matters not the printer model). Windows was missing basic printer files needed to operate any given printer. The fix for those systems was a complete fresh install of windows. Its suggested to never use a copied windows CD. It matters.

Good Luck electrics!
If I can help you further, feel free to post.
There is rarely 1 way to fix every thing.
Mike