How to set the timer? No manual

To set the clock, press
"Clock"
once
or
"Timer/Clock"
twice
(depending
on your keypad)
.
The colon symbol (:) will flash.
Enter time of day.
The time appears
in the window; the colon continues
to flash.
Press
"Clock"
or
"Timer/Clock"
again - colon stops flashing; time of
day is set !

press,timer/clock ,colon will flash ,enter correct time{i.e. 12:34},press clock/timer again,,all set,if it doesnt work,return it to where you bought it,

1. Open door
2. Press clock/Kitchen Timer button the display will show "0:00" with the hour"0" flashing.
3. Enter the correct hour by turning the potary dial. Enter 1-12
4. Press clock/Kitchen Timer button the display will show "0:00" with the minutes "00" flashing.
5. Enter the correct minutes by turning the potary dial. Enter 00-59
6. Press clock/Kitchen Timer. The colon will remain flashing.
7. Close the door.

HELLO.

solution on setting your microwave clock is explained below.

This is a standard 12-hour clock (12:00-11:59) and does not show a.m.or p.m.

The microwave oven and timer must be off.

1. Touch Clock.
2. Touch the number pads to set the time of day.
3. Touch Clock or Start.

Thanks.

HELLO.

Setting your microwave clock is explained below.

It is a standard 12-hour clock (12:00-11:59) and does not show a.m.or p.m.

The microwave oven and timer must be put off.

1. Touch Clock.
2. Touch the number pads to set the time of day.
3. Touch Clock or Start.

Thanks.

HELLO.

The solution to your problem is detailed given below.

This is a standard 12-hour clock (12:00-11:59) and does not show a.m.or p.m.

To set:

The microwave oven and timer must be off.

1. Touch Clock.
2. Touch the number pads to set the time of day.
3. Touch Clock or Start.

Thanks.

According to the manual this is how to set clock.

To set the clock, press "Clock" once or "Timer/Clock" twice (depending on your keypad).
The colon symbol (:) will flash.
Enter time of day. The time appears in the window; the colon continues to flash.
Press "Clock" or "Timer/Clock" again - colon stops flashing; time of day is set.

If you need the manual it is on link below.

http://service.us.panasonic.com/OPERMANPDF/NNH624-SET%20UP.PDF

Good Luck

The manual for the Magic Chef MCD1311ST Microwave can be downloaded in pdf format from the following site (follow the link then click the "Manuals" tab):
http://www.mcappliance.com/mwodetailpage.aspx?ModelName=MCD1311ST

If you don't have time to download, here's what the instructions state:

SETTING THE CLOCK
When the oven is first plugged in, the display will flash ":0" and a tone will sound. If the AC power ever goes off, the display shows ":0" when the power comes back on.

1. Touch CLOCK pad.
This is a 12 hour clock system.

2. Touch CLOCK pad once more.
This is a 24hour clock system.
NOTE: This oven has multiple clock system. If you want 12 hour clock system, omit this step.

3. Enter the correct time of day by touching the numbers in sequence.

4. Touch CLOCK pad.
The display stops blinking, and the colon start blinking. If you selected 12 hour clock system, this digital clock allows you to set from 1:00 to 12:59. If you selected 24 hour clock system, this digital clock allows you to set from 0:00 to 23:59.

5. Touch STOP/CLEAR pad.

NOTE: If you attempt to enter an incorrect time, the time will not be set and a error signal tone will sound. Touch the CLOCK pad and re-enter the time.

Pressing "timer/clock" button 4 times turns on and off demo mode.