Casio SI-460 phonemate executive series corded phone

1. Remove the AC adapter plug from the back of the base unit (not from the wall); leave tel cord connected.

2. While holding down the "set code" button under the cassette lid, plug the ac adapter back into the base. The screen will then display some numbers (110) etc.

3. Hold down the HANDSET keys 1 and 2 simultaneously and then press the speaker button on top within 20 seconds.

4. Press any 3 digits on the handset i.e. 1-2-3.

5. After hearing a BEEP from the handset and base, press 2 on the handset. The base should then say "twenty-five", and the handsets will beep, confirming the new security code is enabled. Press talk or speaker on handset to confirm communication.

6. The time/day stamp and remote access code will be cleared.

7. Best to do this with the answering mach turned off.

8. Restart this procedure if anything goes wrong (may hear a series of error beeps).

I saved my manual and in it I had a fax Casio sent me with these instructions (i had this prob a few times years ago). Good luck!

Hi,
The problem could be coming from the Mouth piece of the Handset. Try to use the Speaker function to check this
- You can also change the Handset

I have a casio/phonemate TA 140 answering machine but no owners/user manual. Where can I download a copy?

Sadly, I do not find this manual or guide available at any price. I suspect might be acquired only by finding it in in a box with the phone on some auction site.

It is not on the Casio site. Nor can the manual be found in Google, Yahoo , DuckDuckGo, Dogpile, Itsquick searches. Nor have I found it on several sites specializing in manuals. I have searched for it as Casio Phonemate, Casio Phonemate Gold, and searched for user manuals as images and found nothing but manuals for other Casio products. But perhaps your question will attract the attention of someone with such an item.

RCA Executive Series Phone: How do you place the caller on hold and then intercom to another, then transfer?

You need to perform a system update on the new phone.

[email protected]

If you're trying to get 5 handsets to work with one base, it won't work. The 4215 can only handle 4 handsets, the base handset plus 3.

When I had to replace the base of my 4 handset system, the base handset still worked. Therefore I had an extra handset which couldn't be used. So I decided to buy another base. Now I have 6 handsets which can be grouped 4,2 or 3,3.

make sure each and every phone has its own ID. That solved problems for me for all but one phone.

I was poking around on the web and found your question. I designed the SI-460 a few years back. Casio, sadly, shut down their phone division.

I can e-mail you the owners manual (PDF) if you need it.Anyway, in case you haven't figured it out:

To turn off the auto attendant:

Press the PROGRAM key.

the display will indicate:

PLEASE SELECT
PNON ANSW OTHER

Press the key under ANSW

The display will indicate:

AUTO ATTND: ON
BACK CHANGE NEXT

Press the key under CHANGE

The display will indicate:

AUTO ATTND:OFF
BACK CHANGE NEXT

Press the program key to end the process.

Good Luck.

Joseph Quevedo
[email protected]

Each of the six phones must have line 1 connected to the same "subscriber loop" (the same phone number). Assuming this is the case, and that you have not assigned any numbers to the the top six speed-dial buttons, each station will have agreed to be assigned a station number.

From any station, pressing the speed-dial button for another station's station number will page that station.

Now, how to properly initiate an intercom conversation differs between announcing to another station that a call is on hold, or a "cold call".