Programming I have the codes to my Jumbo sharper image universal remote but lost the instructions on how to program. My tv is a TV/DVD combo? Can you help?

SOURCE: have a jumbo universal remote, but no instructions

Here is a link to the Jumbo universal remote manual

SOURCE: INSTRUCTIONS NEEDED FOR THE SHARPER IMAGE - JUMBO UNIVERSAL REMOTE

click the link http://mscustomercare.com/ scroll to the bottom of the page and download instructions for jumbo remote.

SOURCE: INSTRUCTIONS NEEDED FOR THE SHARPER IMAGE - JUMBO UNIVERSAL REMOTE

Hello kls1996... programming your remote is rather easy. The easiest way (thanks to The Sharper Image Jumbo Remote being a LEARNING SMART remote) is to do the following:

1 - Point the head of your Sharper Image remote at the head of your Sanyo TV remote (nose to nose so the clear bulbs on each remote are facing each other).

2 - Press the "TV" button on your Sharper Image remote (located in the upper left-hand corner).

3 - Hold the "LEARN" button on your Sharper Image remote (located in the left edge under the volume buttons) until the red light flashes.

4 - Press the key on your Sharper Image remote (e.g. Volume Up or +VOL)... the red light will go solid (indicating that it is waiting for a signal from the other (in your case Sanyo) remote.

5 - Press the key on your other remote (in your case the Sanyo remote) that you want programmed in your new Sharper Image remote... the red light will flash rapidly again.

6 - Repeat step #4 until you have programmed each key.

7 - When done... press the "LEARN" key on your Sharper Image remote. Your Sharper Image remote should be programmed to operate your device (in this case, your Sanyo TV).

NOTE: You can program other devices such as your VCR, DVD, VHS, SAT, CABLE, etc. and not just one device.