How to set the clock on my car stereo

Mosfet 50wx4 indicates a feature of the Pioneer car radio. It isn't a model number. One Pioneer car radio/CD player with this feature is the DEH-1500. On this model, you need to turn off the unit to set the clock. Press and hold the Source button (to the left of the preset tuning buttons) until the device turns off. Press Audio (upper right corner) repeatedly until the clock appears in the display. Use the arrow keys (Skip/Back or Left/Right) on the right hand side of the radio to select a segment of the time to adjust. Use the Up/Down arrows to set the current time. Repeat choosing the time segment and adjusting the time until both the hour and minutes are correct. Press Band or press and hold the Audio button to exit the clock setting mode.

ManualsLib has the manual for the Pioneer DEH-1500 here: https://www.manualslib.com/products/Pioneer-Deh-1500-Car-Cd-Player-Mosfet-50wx4-Super-Tuner-3-Am-Fm-Radio-3432555.html . See page 16 for the clock setting procedure: https://www.manualslib.com/manual/129844/Pioneer-Deh-1500.html?page=16#manual . See page 6 for the picture of the front-panel buttons for the DEH-1500.

I hope this helps. Please add a comment with the model of the car radio if the above procedure doesn't work for your unit.

Cindy Wells

http://www.pioneerelectronics.com/PUSA/Car/CD-Receivers/DEH-P2900MP

there's some links on the web page above to the installation and owners manual

Here is a link to the owner's manual for the stereo, it will tell you how to set the clock:
http://a248.e.akamai.net/pix.crutchfield.com/Manuals/130/130DEHP500.PDF

For clock turn key on and stereo off. Press and hold the function button for 3-5 seconds. the clock should appear with the hours flashing. Use the up-down buttons to set hours. Push the right button to set the minutes. Now turn on the stereo with the source (or power) button and your done!
Remember key on stereo off. hold function, the rest will become second nature once you've done it a few times.
Tuner pre-sets are super easy. Tune to the station you want and then just hold the # button (1-6) that you want that station on for about 3 seconds. The channel your on, (e.i 104.9) will flash a couple of times and then stop flashing. When it stops flashing it's in the memory. Tune your next channel and hold # 2,3,4,5,6, If 6 isn't enough push BAND and your on FM-2 with 6 more pre-sets, Push it again for FM-3 with 6 more presets. Push it a 3rd time for the AM band with 6 pre-sets and one more time to get back to FM-1.

Here's a link to the DEH-6700MP manual:

http://fitness.manualsonline.com/mdownloads/e9ea0982-854f-cef4-edd6-86295158c9cb.pdf

How to set the clock is found on Page 41.

That should work for you...

depending on how old the unit is, there is a few different ways, first hold the source button until the until turns off. then hold the the audio (a) button or function (f) button until another menu is accessed, that is where you should find the option to change the clock. if the audio or func. buttons dont work, try holding the source button down until the unit turns off, then hold the source button again until you get to the mebu. hope this helps

ok what u do is turn radio off hit clock so that it displays the time then hold audio button in until clock starts flashing then use your arrow ****. not your vol. ****.

Pioneer stereos clock setting
1)turn car iginition "ON"
2)turn stereo ON and then OFF.
3)Press SRC or Joystick until blinking clock appears
4)Set clock by pressing rt,left &top,bottom keys around volume knob (joystick).
i hope this helps.

I have deh 1450, turn ign on, radio off. On mine I pressed and held the top right button (audio) clock starts flashing. Set time using directional buttons (up, down, left, right) When finished I pressed the 'loud' button (bottom right of face plate to end

Go to Pioneer's website and look up your model number.
Yes, you need your model number.
You should be able to find a user's manual there.

Knowing newer Pioneer's, with the power off, press and hold the function button until a menu comes up, then press to advance to clock settings.