Mtd 22" Yard Machine Push Mower Logo
Posted on Jan 21, 2013

Lawn push mover - Mtd 22" Yard Machine Push Mower

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Jan 21, 2013
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Jan 21, 2013
Answers
1
Questions
0
Helped
35
Points
3

STARTING PROBLEMS ?? For a gas engine to start basically you need two things..fuel delivery and good spark....remove the spark plug ...Is it wet with gas??IF YES good you have fuel going into the cylinder.BUTwhat about spark?..Put the plug back in Pull the plug wire use a wooden closepin to hold the wire real close to the top of the sparkplug and have someone pull thr cord you should see little sparks jumping from the metal connector on the end of the plug wire to the sparkplug if you have spark.. if you have both fuel and spark maybe you have bad gas??You could try shooting a little starting fluid[ether] into the sparkplug hole screw the plug back in and try starting again..Goodluck RW...

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Toro push mover starts then quits

Looks like a fuel problem. Remove fuel line from carb., should get fuel.
0helpful
1answer

My blade keeps coming loose after hitting a rock on lawn mover

is the bolt stripped so it wont tighten?

Is the threaded hole on the Crankshaft of the mower cracked
0helpful
1answer

The rear wheel drive in my Husqavarna push lawn mover quite working, how can I fix it?

You can try putting a little more tension on the drive belt. It is probably stretched out a bit and the drive engagement cant cancel all the slack out. So, the belt slips.

Pull out your owners manual and look up instructions for tightening the drive belt. If you dont have a manual go to the Husqvarna website and get a PDF copy.

Good luck and be careful!
0helpful
1answer

Toro 6.5HP lawn mover it starts the it stops.

CHECK FOR WATER. DRAIN TANK AND REFILL MAY HAVE TO DRAIN CARB
0helpful
1answer

I can't disingage the lever to cut grass on my craftsman riding lawn mover. Now because of this I can't start the mover.

the lever moves an arm on the deck connected to a pivoting plate holding the idler pulley. when you push up the lever, it pulls the pivot [and idler pulley] back and puts tension on the belt. if this pivot gets rusted, it sticks and won't release tension on the belt. find the pivot point and lubricate it thoroughly with oil, wd-40, or liquid wrench, then work it back and forth by hand until it is freed up
0helpful
1answer

Honda, self propelled lawn mover. GVC 160. Used

Could be Flywheel Key, Coil and Do buy a New Spark Plug. Make sure Head bolts are tight.
Jun 26, 2009 • Garden
0helpful
1answer

Lawn mover - self propelled does not work - need to manually push

Take it to a shop. one of your safety switches is most likely defective.
Apr 27, 2009 • Echo Garden
2helpful
1answer

Broken starter cord MTD Model 125-478R062

try this link.
http://www.smallenginesuppliers.com/shop/html/broken_starter_rope.html

you will want use size #4 or 4.5 starter rope. about 7 foot in length.

Not finding what you are looking for?

45 views

Ask a Question

Usually answered in minutes!

Top Mtd Garden Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Are you a Mtd Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...