At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi..Please contact the vendor from you have purchase. and replace door handle set or door knobs (knocker). or you can contact to other for new buy as per your requirement. i hope this will help you..
I'm not sure whether you need instructions for an entry door or an internal bedroom or closet door. So let me steer you to the online site: Go to : http://www.kwikset.com/Products/Categories/Door-Levers.aspx
Then "Browse by function" for the appropriate type, then choose the Lido On the next page, you can click on any Lido finish, the instructions will be the same regardless of finish. Once you 're on the next page, under the red "Technical Documents" heading, choose "Installation Guide". It will take a moment to download the PDF file of the installation instructions for you to follow. A note about PDF files: If you cannot view a given file, you need to first install Adobe Reader. You can get the free download here: http://get.adobe.com/reader/
Some schlage rosettes screw off. They have a special wrench. You might go to a lock shop, and ask the locksmith how to take it off. Other type knobs you pop off with a chisel or knife.
Why does the interior knob or lever on my front entry
handleset sometimes cause the latch mechanism to jam and the exterior
thumb press to lock in place?If the front entry handleset is
newly installed, the latch mechanism may be binding. If the exterior
handleset is left sitting in the bottom of the bore hole through the
door, the rectangular spindle that extends through the latch may be
somewhat tilted and binding. This can be checked by loosening all
screws, slightly lifting the exterior handle, and then tightening the
screws before releasing the handle. This may make the spindle more level
with the latch and eliminate the binding. If this does not resolve the
problem, or the handleset has been installed for some time before the
problem occurs, the latch mechanism may be failing and need to be
replaced.
Look at the most bottom part of the hardware on the inside and see if there is a little round decrotive cover [looks like a button,dime size] and will either will pop off or try unscrewing,once of you should find a single screw which will allow you to tighten hardware or remove.
If this is the lock part itself,try gradually loosening install screw enough to be able to manuver lock to work and if so slowly tighten as you test each time gradually. Please clarify problem more if need to.
×