No dial tone on phillips cd445duo

The battery in the handset may be faulty/flat. If it does not charge up then replace the battery.

I've pulled up the user manual for your phone. Thank you for providing the phone make and model first, and the complete description of your issue!

The manual says the battery should be charged for 15 hours before first use.

You may be set to pulse dialing , even though the factory default is for tone dialing. If you push the 7 key, you would hear 7 pulses or clicks in succession. The dial tone will be gone once a pulse has been received. And you say there are clicks heard and no dial tone.

You can set Handset settings (Page 12 in the PDF copy) and customize how your phone works.

Hit MENU and use the up-arrow and down-arrow keys to scroll to the desired feature., this time called DIAL TYPE, then his SELECT. Looks like the sixth menu entry from the top after LANGUAGE.

It should read:
DIAL TYPE
TONE

If it says something else, perhaps PULSE, use those arrow keys again to change the Dial Type to Tone. Then use OFF to back out of the selection and again to clear the menu.

Attached is the link to the manual. Click the button on the screen to "Open as PDF" and you can open it in your PDF reader software or save it to your device for offline reading.

http://phone.manualsonline.com/manuals/mfg/att/e2125.html

I can't get dial tone either. Let me know if you find a solution please.

Check the Battery on the Handset. remove the pwr frm the base unit n connect aft 30 sec. aft this if it still says the same msg, then the handset needs to be replaced.

if you can get dial tone with another phone, look into manual for any instructions, usually a toll free number for help. ( BEST ) otherwise take phone back for exchange. may be problem in the board.

Replace the handset and cord

Hi, I had this problem and spoke to sagem at www.sagem.com/support.
the solution is simple, turn off your fax machine at the wall, take out your batteries from the handset and leave both off for 15 minutes. then turn on the fax machine and replace the batteries back in to your handset, at it will work.....

The problem is possibly the keypad on the phone. Try another phone , preferrably a standard corded phone. If you still cannot break the dial tone, then the problem is with the telephone line (phone company)

i have a phillips 3 handset cordless phones one base station is stating press ok keeys to register

TONE A PULSE