SOURCE: olympus digital code D
Camera will not turn on and displays D :
5E02
shutter will not remain open then the above is displayed
SOURCE: camera olympus error D: 5f08 5e02
The error message (D: 5e02) means that your lens is dying / dead. It just happened to mine and I was told that it could be repaired, but it would cost as much as a new camera. I've only had mine 2 years and I've been really careful with it, so I'm a bit annoyed, but I have used it a lot!
SOURCE: Olympus Stylus 710 Error: D: 5f08 5f0a 5e02 5f08 5e02
this is the most common problem with the olympus cameras the lens has been knocked and by you pulling on the lens it sounds like you have done some damage to the motor that bring the lens in and out thats why its making that noise what you needed to do was move the lens either to the left or the right you will no when its fixed because the lens just pops out and the camera will be fine this works every time i just hope you havnt done to much damage alredy goodluck
SOURCE: Getting error 5f08 5e02 in my olympus camera..
The problem you are describing is a problem with a sensor in the lens assembly of the camera. It seems to have failed and needs to be replaced. Following are the instructions to send your camera to Olympus for service. http://olympusamerica.com/cpg_section/cpg_servicerepair.asp Olympus will charge a flat rate repair fee for this product if beyond the one year factory warranty or the warranty is voided. The cost is $86 plus your local sales tax. This covers parts and labor, factory cleaning and diagnostic check, 6 month warranty and the cost of shipping the product back to you is all included in that price.
SOURCE: error code 5f08 and 5e02 on olympus stylus 710
If the camera makes a whirring noise when switched on then unfortunately from the many threads on this issue the problem appears to be with the poor quality materials used by Olympus. The lens gearing mechanism is plastic and if it is obstructed whilst extending then the gears can become damaged or slip out of alignment. As per feedback from many other users the cost of repair and likelihood of a re-occurrance are reasons to dump the camera and go for a more reliable make. (Or try thumping it which appears to work in some cases !!)
This being a 2nd bad experience with Olympus quality they are well and truly off my list of preferred suppliers
2,853 views
Usually answered in minutes!
please help me olumpus camara 700 stylus have error 5fo8 and 5e02
I´m also getting error 5f08 5e02 on my screen.
I have the same problem, I tried all the suggestions in this space but non of them worked!
Any other idea?? I phoned Olympus and they will fix it for a flat fee of $146 and change, but I think that it is a problem with the camera and not the usage (Mine was babied at all time) and that it should be fixed by the company at no charge...
Same error code 5f08 5e02 on a blue screen. Can view pictures but not take any. Zoom goes in and then retracts.
I have the same problem with my olympus cam 5fo8 and 5eo2 is showing in the viewer i had tried fixing it but to no avail. im so desperate im going for vacatin anfd i love taking pics along . What i will do???
I press power on and the camera makes grinding noises, lense extends, retracts while the screen shows a blurry picture and then the blue screen displays
D :
5 f 08
5 e 02
I tried the remove battery and hold on button for 10 seconds but that did not work. This seems to be a software error.
I press power on and the camera makes grinding noises, lense extends,
retracts while the screen shows a blurry picture and then the blue
screen displays
D :
5 f 08
5 e 02
try this http://www.fixya.com/support/t997848-oly...
×