Earpiece sound silent volume 7 sounds like a volume 2 or 1

Hi There,

As per my understanding you have set your ring style profile to loud and highest volume 7 but still ur phone phone rings on silent when someone calls..

Please change the Profile setting once again as mentioned below:


How to change call alerts and styles?

1.From the general menu, select "Settings" > "Ring Styles" > "Style Detail"
2.If you select one of the styles, ie. "Loud" you can then highlight by scrolling down on the wheel & select "loud detail" & press on the "change" button (top right corner key).
3.Here you will be prompted to change any feature available to the "loud" style: volume, ringtone, alerts, voice mail, text messaging sounds, reminders beeps etc etc. All you need to do is to select the feature you need to change with the directional wheel and press the "change" button for each.

If you think my solution helped u to resolve ur issue please do vote for me..

Thanks
Enjoy!!!

The Sound Profile only covers call sounds.
Sound Profiles
This menu allows you to specify how you are informed of
incoming calls.
Selecting a Profile
1. Touch ➔ Settings ➔ Sound Profile.
2. Touch the radio button next to the profile name. The
selected profile activates. Choices include:
• Normal
• Silent
• Driving
• Outdoor
Normal Profile
The phone’s profile defaults to Normal. Use the following
procedures to change the profile.
Editing the Normal - Call Profile
1. Touch ➔ Settings ➔ Sound Profile ➔ Normal.
• Touch the name field and not the radio button to the right.
2. Touch drop-down menu (upper-right of the screen) and
select Call.
3. Select the Call Alert Type field and select one of the
following and touch Save:
• Melody: the phone rings using the ring melody selected in the Ring
tone menu.
• Vibration then Melody: the phone vibrates and then starts ringing.
• Vibration & Melody: the phone vibrates and plays a melody
simultaneously.
4. Touch the Voice Call Ringtone field, touch to select a
ringtone and touch Save.
5. Drag the Ringtone Volume slider to the volume level you
desire (range is 1-7).
6. Touch the Vibration Pattern field, then touch to select
Vibration 1 - 5.
7. Touch Save to return to the Sound Profiles menu.
There is no mention of keyboard tones in the user manual.

There are a couple of causes:- 1, Faulty Earpiece speaker, change the earpiece... 2, Faulty Ribbon/Flex, it connects the phones main PCB to the screen, the top keypad the front camera and the earpiece, a kink or tear in this can cause any of those to malfunction. Change the ribbon/flex 3, If its only happening when a certain person calls you, the problem could be at their end and they're microphone might be faulty on their handset... 4, Less common but there are IC's that control the sound on the 6500 these could be faulty or have dry solder, these can be either reflowed or replaced.

have the speaker replaced......take the phone to a mobile service center and have them fix it for you...

try replacing the ear piece to correct this issue

reset it to default factory setting. but becareful of contacts, saved things in your mobile memory

Seems your ear speaker has a problem. It need to be changed.

go to ringtones/loud detail/keypad volume and change it to silent.....or chnage the volume from 7 to 0.

Check the middle button on the side. Hold it in and raise the earpiece volume to the highest before you throw the phone away.

Sounds to me like you have a stuck key somewhere on your phone. Was it dropped? Or maybe you hit it too hard. Look closely at the buttons on the side of the screen . you know, the ones that normally change your volume when it's open. One of those is malfunctioning in the down or closed position.