Question about Sony FD Trinitron WEGA KV-32FS100 32" TV

1 Answer

Tv wont turn on

Pressing the tv power button you can hear a click no picture,sound, then the sound stops. Hear another click and the stand by/timer light flashes

Posted by on

  • ryan kelly Jul 16, 2007

    about 10 flashes then there was a quick 3 flashes and then 4 flashes. After the four flashes it stops and then repeats the 4 flashes

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 3,130 Answers

How many times does the light flash, as there is a code that can give an indication as to what circuit is bad.

Posted on Jul 16, 2007

  • Larry  Dillon
    Larry Dillon Jul 17, 2007

    There is a short in the set. Could be the high voltage circuit or the power supply, if you have the service manual and the proper test equipment, it should not be that hard to trace this down. But if you do not have the printed circuit board experience with solid state TV sets, play it safe and call in an authorized Sony repair center. Good Luck

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Standby/timer light stays on red. no picture or sound on tv.


this is a simple capacitor fix at your local tv guy..should be 100 to $150 max

Apr 09, 2014 | Sony KP-48S75 48" Rear Projection...

1 Answer

How do I reset my mitsubishi diamond tv? The green timer light is flashing.... I can't get the tv to come on.


If the light continues to flash with no picture and you still get sound, your bulb is out. Though it could be any number of issues. To reset a Mitsubishi, hold the power button down for approx. 10-15 seconds until you hear a faint click.

Jan 11, 2011 | Mitsubishi Diamond WD-65831 65" Projection...

2 Answers

No picture no sound opc light and power light


This is very common in sharp tvs.U turn it on.U get power on light stable right?U hear a click,one or twice,sometime tv is good right?Sometime POWER light and OPC light flashes?Push the power button on/off couples times will work, picture will come on.If keep trying off/on couples time after POWER and OPC flashes,don't ever stop and never get backlight and picture.Ur Video backlight board is dead must replaced.

Dec 28, 2009 | Sharp Aquos LC-46D62U 46 in. LCD HDTV

2 Answers

I have a Sony Wega KV-34HS420 TV that takes several tries to turn on. When I push the power button or remote power on I hear the normal click and the sound comes on for 3-5 seconds but then I hear a second...


Since the set appears to "recover", it suggests either a poor solder connection or bad cap somewhere in the power supply. The 7 blinks indicate the problem circuit is in the horizontal area. Check the regulator (STRxxxx) IC in the power supply. If you do not have experience working with TVs, please refer this repair to a shop. The regulator IC costs around $25.

Dan

Nov 16, 2009 | Sony FD Trinitron WEGA KV-34HS420 34" TV

1 Answer

Standby/timer light stays on red. no picture or sound on tv.


my sony red light flash.but it will not turn on just clicks

Nov 26, 2008 | Sony KP-48S75 48" Rear Projection...

3 Answers

No picture, no sound.


Hi i have a pilips 42" plasma tv (42PF5320/79) i can hear clicking the green light is on and the tv will go into stand by if i press the power button and the red light also comes on .I have turned it on and off and it works now nothing just the light on the front as if its working looking at the back through the slots two green lights come on then the tv clicks and they turn off,thanks

Aug 06, 2008 | Philips 42PF9630A 42 in. Plasma Television

1 Answer

Akai pt4298hd rear proj tv


Unit may be in timer mode. Check menu settings

Apr 22, 2008 | Akai PT4298HD Rear Projection Television

5 Answers

Sony Trinitron blank tv/no picture


When I turn on the TV I hear the click sound and the TV powers up. Immediatly the red (standby) light begins to flash 6 times on and off. this happenes only in the morning, but after 5:00PM when youturn on the TV as if nothing is wrong.

what is the problem?

Feb 08, 2008 | Sony FD Trinitron WEGA KV-32HS510 32" TV

14 Answers

Sony tv repair


I own a Sony T.V. model #KV36HS510, Serial # 9024184,Event# E36002407 and it"s aTrinitron brand name. Like the problems before no picture or sound, stand by light on front of unit flashes. When trying to turn it back on you can hear the power click, like it wants to turn on, but does not.

Dec 22, 2007 | Televison & Video

1 Answer

Sony Trinitron Kv24Fv12


stand by timer light flashes 7 times no pic no sound. how do i
stop timer

Apr 09, 2007 | Sony FD Trinitron WEGA KV-32FS100 32" TV

Not finding what you are looking for?
Sony FD Trinitron WEGA KV-32FS100 32" TV Logo

Related Topics:

294 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76099 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...