When I turn on my IR1018j canon copier if display SYSTEM ERROR E350, anyone can help me plc

SOURCE: Error code E000020-0181

Hello Brass, This error code means that the yellow drum/developer unit has failed. Your machine has 4 drums, cyan,magenta,yellow and black. At best they are good for about 40,000 copies. You can order one online and it is fairly simple to replace. Let me know if I can help further.

Chris Coughlin

• 1326 Answers
• Posted on Feb 11, 2008

SOURCE: HOW TO CLEAR ERROR E350-0000

Did you recently clear RCON and tried to due a CCD adjust? The problem could be the that the left side glass retainer changed or mared or has a doc feeder been added or removed. There is a bar code on the under side of it. The part number for the 1000/3100 is FF5-4662-020, the 2400 FF5-8802-000

SOURCE: ir 2000, system error E000

The main thermistor reading does not reach 40°C 14 sec after the fixing
heater goes ON. (fixing low temperature error)

If E000 is indicated, the RAM on the image processor will
retain the error memory of the fixing assembly after the power switch has
been turned off an then on. Execute the following in service mode, and
turn off and then on the power switch to clear the memory: #7
PRINTER>#4 PRINTER RESET>YES=(*).

Entering service mode: press "aditional function" and after "#(ID)"

SOURCE: Canon copier show error code:E100

E100 means the copier is not warming up.Make sure all the wires to the fuser are properly connected, then open and close the front door.you may have to go into the service mode to reset the error code.Good Luck

SOURCE: Canon imageRUNNER 2020 alternates between displaying Error Code E019 and saying "Waste Toner Full".

hi you have a waste toner error code, the waste toner is apart of the drum unit in these machines so you will need to order a new drum unit for it.
easiest way to fix the problem.
Canon Tech