JER 321 how do i set up my JER 321 remote to my tv?

I found the codes in this page http://remotefinder.rca.com/

Codes for Jer 321, Jer 323 and Jer 422.

To introduce it to your universal control Jer 323:
1. Press the device button you need (for example, TV)
2. Press the input key and keep pressing it while introducing your code (for example, Sony Tv: "Input+1218")

Try http://remotefinder.rca.com/default.aspx?site=jensen to get the code for the device.
I also found this manual. It's for the 321, but the process will probably be similar.
http://safemanuals.com/user-guide-instructions-owner-manual/JENSEN/JER-321-_E

To program this remote you should do the next steps:

1.Manually turn on the component you want the remote to control.
2.Press and hold the component key (TV, VCR, Etc..) you wish to program. The illuminated ON-OFF key turns and remains on.
3.While holding the component key down, input the 4 digit code for your component (TV, VCR, etc), after you press the first digit the light on the ON-OFF will go off, continue with the remaining digits.
4. After the 4 digit code has been entered, press the power button, if it works you get the right code, if not, repeat steps with another code in the list.

Here you go...it took a while but I found the user manual cause I ROCK....that's right say it with me....He...Rocks...hehe...but anyway here is the link address if the link doesn't work...
http://safemanuals.com/user-guide-instructions-owner-manual/JENSEN/JER-321-_E

I hope this helps...good luck and thanks for rating my effort....the Fang

Download the completeuser guide (3257 Ko)

visit www.jensen.com and download the codes.
visita www.jensen.com y baja los codigos.

Here you go...it took a while but I found the user manual cause I ROCK....that'sright say it with me....He...Rocks...hehe...but anyway here is the linkaddress if the link doesn't work...
http://safemanuals.com/user-guide-instructions-owner-manual/JENSEN/JER-321-_E

I hope this helps...good luck and thanks for rating my effort....the Fang

Download the complete user guide (3257 Ko)

hi, for sony tv, press and hold (tv) button while pressing 1002 or 1218 on your remote, then release the (tv) button. the orange button on top will blink twice for your confirmation. good luck.

island.rover

go to www.jensen.com and download the codes is free.

Toshiba Tv Codes

1.Manually turn on the component you want the remote to control.
2.Press and hold the component key (TV, VCR, Etc..) you wish to program. The illuminated ON-OFF key turns and remains on.
3.While holding the component key down, press and hold the ON-OFF key. The illuminated ON-OFF key turns off.
4.After holding down both keys for three seconds, the illuminated ON-OFF key turns back on.
5.Release both keys. The illuminated ON-OFF key remains on.
6.Press and release the ON-OFF key repeatedly until your component turns off. Wait four seconds between each keypress. Each time you press the ON-OFF key, the illuminated ON-OFF key blinks and the next code in the list is sent. This process continues until all of the codes in the Code lists have been searched. If your component turns off, you have found the correct code.
7.Once you have found the correct code, you must save the new code by pressing and releasing the STOP key. The illuminated ON-OFF key turns off. You must press the STOP key to save the code or the correct code will not be stored.