Problem with Siemens SE587

read the router manual. then ask your question.

Hi Kent - this is apparently a router supplied by an ISP in the UK. From what I have seen, there is a WPA key on the bottom label of the router. It looks like this:



I found this on this site.

I hope this helps & good luck! Please rate this reply "4 thumbs up" if you're happy with the info I found. Thanks!

Oops - wrong button pressed. This was meant as a solution, not as a clarification request.

You did not mention for what application you want to set portforwarding for.
Take a look at this page. It gives you detailed instructions for all kinds of applications. If yours is not in the list, you can still follow the general instructions.

If you have any more specific questions, just come back here and leave a comment - I'm happy to help.

pile of ****!.. the edimax print server doesnt seem to regonise and connect to wireless networks if they have a "space" in there name!.. took me ages to figure that out!.. and now its conected it constantly comes up with a communication error during printing!

you can try to google password genius

hi there, windows vista, as we all know is more focused on to the security... but it becomes very difficult if it detects other devices as an error...

With vista you can try to run the installation CD for the router, so that the vista knows that there is a driver for that router, without that it will not recognize the router and will keep detecting as an error...

was i helpful?

for more help log on to http://primustel.blogspot.com

Hi,

If this is router is gifted to you by a friend of yours who is from UK, Please check if this is locked. Most of the times these would be locked by the ISP. This is a router provide by tiscali UK. Please select the dialing number to 0,38 this is the dialing code for india.
If you use this should work and use 192.168.1.1 as default DNS.

Here ya go:

http://uk-tiscali.custhelp.com/cgi-bin/uk_tiscali.cfg/php/enduser/std_adp.php?p_faqid=868

You can try this link, this has a step by step instruction and screen shots as well. I hope this one helps.

http://portforward.com/english/routers/wireless/Siemens/Gigaset-SE587/wireless.htm

HI,

You can try manuall setup of da router.

The Default gateway for Siemens Gigaset SE587 is 192.168.1.1. Open Internet Explorer and put the def gateway in the browser.

The default username and password for siemns router is admin.

Click on Setup Tab than Basic Setup on left hand side. Update the details as folloing-

Use – Tiscali data PPPoA Interface

PVC Selection – Tiscali data PPPoA

Authentication – Auto

User Name - Tiscali u/n

Password - Tiscali password

PPPoA Connection Mode- Always On

NAT - ON

And click on save settings. To confirm if the customer is connected, check the status of Online light – which should be green. Alternatively click on status (On top) to check internet status to confirm connection.

Setting Up Wireless connection – Click on da wireless tab on the top.

Ensure that the Auto channel is disabled and the wireless channel is 11, wireless n/w is Enabled and mode is Mixed.

To secure the wireless connection – Click on Wireless Security option on left hand side

If you want the Security mode as WPA than select the wireless security mode, as WPA and enter WPA Shared key which would be on the base of the router. Again click on save settings.

Try connecting to the wireless network again and I m sure it should work..... lemme know if it does.

Cheers

SHADAB