Instruction manuel for meat grinder from cabelas model 04-2201

CONTACT Cabela's wpold be your best bet..ck unit for Model# too and post it if you find it.

Otherwise here's their 800#

• 1-800-237-4444

On the web:
Search Results

DENI 5530 INSTRUCTIONS MANUAL Pdf Download.

www.manualslib.com > ... > Deni Manuals > Frozen Dessert Maker > 5530
Deni - Keystone Manufacturing Co, Inc. Ice Cream Maker Instruction Manual. ...Freezing the Speedee Freeze ® Canister Deni Soft Serve Ice Cream Maker. ... placing in the Scoop Factory, and freezing canister is as close to -20°F as possible.

How old is it?? Did you try to locate the manufacturer on their website??

You don't mention what model number, but you might try this page. It has several meat grinder instructions booklets you can download.
http://www.moulinex.com/Pages/default.aspx

Go to KRUPS.COM online, and search their website for a manual for your product. If one is NOT listed, call KRUPS on their 800 number and explain your problem and how to get the manual. OR, you can contact a customer service representative by email, and they should respond within a couple days and let you know how to proceed.

factory or store

take the other side off and take it to a parts store and match it up. they will be able to match it for like to likeand cost you less than buying a full set.

http://www.northerntool.com/downloads/manuals/168650.pdf?cm_re=Product%20Page-_-Manual-_-Tab

What exactly are you having problems? Setting up the grinder? The hopper inserts into the back side of the mixer head locks in place with a set screw. Then insert the piece that looks like an auger push it all the way back. next, comes the four blade knife it looks like this " + " if look at the center of the blade you will notice a square hole on one side place that side towards the auger. Then there are your grinder attatchments I only have two,one coarse, one fine. place one of them against the blades placing the tabs in the cutouts on the discharge end. mext there is a large metal cap thread this on the discharge. Set the control to grind and the speed to 10. You are set to go. cut the meat into strips or chunks that will fit down the infeed and use the plastic plunger to push them into the auger.