There is a new hard disk in it, and I think it need a new driver but I can not find it from LaCies pages.
You need a new driver for sure, and here you can find it driverupdate us. This tool usually keep my drivers up to date (perfectly for now)
take a look
Hello to all. I am looking for someone who still has the drive maxtor blackamor 320 or 160GB. If anyone, he left me his email for me to explain in greater detail my preoccupation. I have a serious problem with mine.
Click start control panel administration tools computer management device manager scroll through all of your devices If you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver If you computer came with a motherboard disk the drivers could be on it. Rather doing a driver hunt which can take hours http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html Windows XP/Vista/7/8
it might take some time being a freeware driver solution Note: it will find all of your outdated drivers
This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point.
Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated.
Hope this helps.
SOURCE: Lacie Desktop Hard Disk beeps when connected
No much help I can give, when an hard drive beeps it has motor error or head error, the disk hardwar is faulty, and you are not able to recover anything from the disk.
A safe data recovery can only be performed by specialized companies on a facility called clean room, where dust is completely removed from the room using a vacuum.
The data recovery using this kind of equipment does not cost less than $800.
SOURCE: Computer will not boot with Lacie Desktop Hard Disk connected.
You can enter the bios on bootup by pressing a special key to force your computer to go into BIOS mode. What key this is varies by computer, often it is F8, F10, sometines F11. Anyway, use the key for your computer, and change to boot modus to not first boot from USB.
SOURCE: ps3 and 1tb hard disk
This one may only have one possible solution.
You probably have heard that the PS3 will support up to a terabyte hard drive. That is true for most of them.
However, depending on the version of PS3, you may have to see if it is possible to flash the BIOS of the PS3. I talked to a Sony representative about the hard drive and it will support a 1 terabyte hard drive.
Contact sony to see if it is possible to flash the PS3 BIOS so it will recognize the drive.
SOURCE: I have a LaCie external harddrive that refused to
i too have had this problem and it generaly means it is broken. sometimes things can be done but it is very costly
SOURCE: Hi. I have a LaCie Hard Drive designed by Poulton
I have the same one. The power supply I have says input 100-240V output is 24W 12V 2A.
I'm replacing the power supply but my big problem is not knowing the polarity of the tip There is no sticker on the hard drive itself or on the power supply (that I suspect is fried). Can anyone help?
Lisa
3,577 views
Usually answered in minutes!
×