I own Unlisted watch model 1181, which has sweep hands and digital. The digital works, but sweep hands are locking up. Don't wan to spend high amount to repair for watch which cost only $29.95 at

SOURCE: How to set kenneth cole unlisted digital watch with 4 buttons

OK I'll do my best to describe the procedure...

Part 1:
Press mode button till the seconds window blinks
Press Lap/Reset button once to make minutes blink
Cycle through minutes using Start/Stop Button

Part 2:
Press Lap/Reset button once again to make hours blink
Cycle through hours using Start/Stop Button

(for this part, it's a bit tricky. Hours can be displayed in AM, PM, or 24 hour duration. AM is represented by "A", PM is shown with "P" and 24 hour mode is shown with "H", so keep an eye in the seconds window when setting your hour so you know for sure if you have the right hour)

When your done setting minutes and hours, press mode button again till you get to main screen
A helpful hint is to remember when setting up anything in this watch, mode will cycle through the different screens, lap/reset will change the value of whatever your modifying (AKA minutes/hours) and start/stop scrolls through the different fields.

Hope this helps. Sorry if it's confusing, best I could do.

SOURCE: Swiss Army watch 70609 second hand pauses

Battery life indicater just warning to get that battery replaced so it wont stop at an inconveinient time

SOURCE: re-set quartz chronograph sweeping second hand

Easy Soultion worked for me. Believe Me I was worried only had the Seiko Sportura for a week now. My second dial for the stopwatch was re-setting to 5 seconds instead of zero. The Solution is
1. pull the Crown all the way out ( In the position you take the crown to set the time , second click ).
2. To set the minute face of stop watch , keep pressing the top button untill it is zero. To set the second needle to zero keep pressing the bottom button untill it reaches zero or where you like it to re-set each time. Depend on you.
3. Once all neddles of stopwatch are at resting postions ( usually zero) secure the crown back to its normal postion. Test your stop watch , hopefully it will go back to zero when you press the reset button. C

Glad to help. [email protected]

SOURCE: second hand on my watch now goes in 5 second intervals

Check the instruction manual if you have one. Tag-Heuer watches move in 5 second intervals to let you know the battery needs replacing. A neat feature. Now you know that you have a real Tag!

SOURCE: Sweep 2nd hand operation & watch time setting on my Pulsar watch.

The larger second hand on the Pulsar PF8036 is part of the stopwatch feature. The upper button starts/stops the stopwatch feature, and the lower button operates the lap/reset function. Why they made the larger hand work only with the stopwatch instead of the smaller hand to the left is beyond me, but that's how it is designed.