Breadmaker BM450/ started on wrong programme

press the cancel button

https://www.kenwoodworld.com/Global/Instruction-Manuals/Cooking-and-Baking/Breadmakers/BM450/19125%20Iss%203%20BM450%20multiling.pdf

http://kitchen.manualsonline.com/manuals/mfg/sunbeam/5891_1_2.html

Put in your ingredients, choose size of loaf, type of bread you want to make then press start and leave alone.

see this review ,may it will help you.
http://www.topbestreviews.org/top-4-cuisinart-cbk-100-2-pound-programmable-breadmaker-review/

1) Eurosonic appears to analog timer:
http://waterheatertimer.org/How-to-set-timers.html

2) There is new series of digital timers from china, also sold as Eurosonic:
Copy following link for possible manual. Always reset digital timers before programming.
http://waterheatertimer.org/Woods-timers-and-manuals.html#13568

3) Add a comment March 2013 and describe timer in detail

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

Plug your machine in and push the menu button again and again are the numbers changing from program to program? If not push the start/stop button with no ingredients in it and if it starts kneading wait a few seconds then push the start/stop button again UNTIL IT BEEPS AND STOPS. Unplug the machine and plug it in again and the program 1 should show again, just push the Menu button until you see the number 9 program. Did that work?

I believe for this perticular model to power-up, you must press the Select button first to select a mode, then press the Start button.

Here's more on the subject...

Addressing Power-up/Start-up Issues:

1. Unplug the breadmaker.

2. Confirm the power source your accessing is live using a blender, toaster, etc.

3. Plug the breadmaker in.

4. Confirm the breadmaker is receiving power:

1. Some models have a built-in off/on switch. Turn it to the ON position.
2. Some models make an audible tone when plugged in.
3. Some models have a colored light and/or a lighted display screen that lights up.
4. Some models require you press the Select button down until the unit powers up.
5. Some models require you press the Start button down until the unit powers up.
6. Some models require you press the Select button first to select a mode, then press the Start button.

3. No, you were not able to confirm that your breadmaker is receiving power? Sorry to hear that. Attempt to have the breadmaker serviced by a small appliance repair facility or discard it.

4. Yes, you have confirmed that your breadmaker is receiving power? Fantastic! Now reset the breadmaker by pressing down on the Start button until you notice a visible and/or audible confirmation, usually within 5 to 10 seconds. Note: It bears mentioning again at this point that some models require you press the Select button first to select a mode, then press the Start button.

You should go ahead and invest in a new machine..also if your pan finish is peeling off that is very bad as you could be ingesting Polyflourocarbons (teflon)with your breads.

Hi Capt,
What all fails when your breadmaker blows the fuse.
The breadmaker is a miniature oven and if your circuit is already to the max and then the BM put it over the edge.
Now I am not saying you don't have defective unit but try to make bread in another socket in the stove. If it blows that fuse, you have a defective BM
These units are a throw away item