I cannot get back to the setup. The channel 2 button on setup holds and the screen shows ch and remote. It seems froze at this time. I cannot get back to setup. My product is panasonic DMR-E75 V Model Number. The serial number is LP4FA00-1280 My address is [email protected] or 1-319-824-3296 in Grundy Center, Iowa 50638. My address is 308 H Avenue. My name is Keith HallI cannot get back to the setup. The channel 2 button on setup holds and the screen shows ch and remote. It seems froze at this time. I cannot get back to setup. My product is panasonic DMR-E75 V Model Number. The serial number is LP4FA00-1280 My address is [email protected] or 1-319-824-3296 in Grundy Center, Iowa 50638. My address is 308 H Avenue. My name is Keith Hall
You can't post conmments that contain an email address.
When Panasonic DVD Recorder DMR-ES10 says X HOLD press Enter and Return simultaniously for until the X HOLD disappears this then unlocks the child lock facility and your DVD player is ready to use
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you point the remote towards sensor, simultaneously hold down the number (1, 2, etc) you want AND the enter button for 5 or more seconds it should switch to the number pressed. Remember if you have a second one, make sure it's off or put towel over its remote sensor. Sue
Press functions,go `to others`select set up,go`to others`select remote control and change to dvd2.Then on the r/c press and hold enter and 2 at the same time for 3secs or more.
Look into your manual that came with your dvd recorder for DMR-E80H, Page 46, Changing the Remote Control Code. My child played with a remote control as well and reconfigured it as well. In the manual, you have explanation how to configure your remote control again to work.
I had the Exact same problem, after finding nothing on the net I called
Panasonic customer-Support and they gave me the information which led
to the solution:
---
If your DVD screen reads 'remote DVD2':
Press and hold simultaneously the "2" & "Enter" buttons (for more than 20 seconds)
If the screen said remote DVD3 then you would hold "3" & "Enter"
----
What I found happens when this command is accepted, the DVD screen changes to display the channel & counter
e.g. "A2 0:00.26"
If the screen changes back to "Remote DVD2" this means that the signal
from the remote control has been interrupted (you stopped pressing, or
the batteries have become weak.)
Providing the batteries have power, try again remembering to hold the "Enter" and number displayed after DVD.
The first time I did this it seemed to take forever (more than 30secs.), but other times it's been accepted in 6 secs.
I had the problem where when i would try to use my remote, it would say "check remote2". I've got a DMR-E55. I called panasonic and they told me to hold down the "enter" and "2" button for about 10 seconds. then it worked. hope it works for you too.
I cannot get back to the setup. The channel 2 button on setup holds and the screen shows ch and remote. It seems froze at this time. I cannot get back to setup. My product is panasonic DMR-E75 V Model Number. The serial number is LP4FA00-1280 My address is [email protected] or 1-319-824-3296 in Grundy Center, Iowa 50638. My address is 308 H Avenue. My name is Keith Hall
×