Xterra FS1.7 elliptical

how do i get restriction code for nokia c3-01.5"

I have never known elliptical audio cartridges give an error message - does this display upon your amplifier ?

Check out this website for more informations:
your-worokout-routine.com!

RUN the software calibration for easy diagnostic and fix it. Read you owner manual and follow the steps.
God bless you

Got a Sole elliptical machine? Is it displaying a NEED LUBE error message when you turn it on? Tyler at Sole service told me this is a software bug. It appears every 180 miles of usage, and it was really only intended for treadmills, not ellipticals.
You can clean and lubricate the rails and wheels - and you should - but the error message won't go away. Instead, you can get rid of it by resetting the odometer. First, press and hold the Start, Enter, and Stop buttons for five seconds to enter engineering mode. Use the arrow keys to select FUNCTIONS, then select ODO RESET and press Enter. Turn the machine off and on again, and voila, no error message.
Thanks Tyler! Happy exercising!

Be aware that the resistance is often the part that requires repair. Resistance is managed magnetically, so often if the machine is working, but the resistance isn't setting correctly or at all, check the bolts that secure the magnets. If they are loose, the resistance will slip. If the bolts are fine, check the magnets themselves by using a refrigerator magnet and see if it is attracted or repelled by the your fridge magnet. If not, the magnets have de-magnetized and need to be replaced.

God bless you

adjust the magnet, tight the bolts with wren. Test the magnet, with the magnet from refrigerator, for repel and attract, if donot, replace.
The resistance depende of it.

sincerely. God bless you

what is the error code displayed

you will need a keypad and overlay call National Gym Supply @ 1-800 496-7278 they will need M & S #

Try unplugging for 5 mins plug back in might reset .