This is from the manual on pages 25/26. After the info below is the link to the manual.
1 {MENU} i {#}
2 Enter the desired feature code.
3 Enter the desired setting code. i {Save}
L This step may vary depending on the feature being programmed.
L To exit the operation, press {OFF}.
Talking
CallerID
(Handset)
{1}{6}{2} {1}: <On> {0}: Off
Talking
CallerID
(Base unit)
{*}{1}{6}{2}
{1}: <On> {0}: Off
http://service.us.panasonic.com/OPERMANPDF/KXTG9331.PDF
Talking Caller ID Handset / Base unit This feature lets you know who is calling without looking at the display. To use this feature, you must: - subscribe to a Caller ID service of your phone service provider. - turn this feature on . When caller information is received, the handsets and/or base unit announce the caller's name or phone number received from your phone service provider following every ring.
This feature lets you know who is calling
without looking at the display.
To use this feature, you must:
- subscribe to a Caller ID service of
your service provider/telephone
company.
- turn this feature on (page 24).
When caller information is received, the
handsets and base unit announce the
caller's name or phone number received
from your service provider/telephone
company following every ring.
The unit announces in English only.
L Name pronunciation may vary. This
feature may not pronounce all names
correctly.
L Caller ID service has a limit of how
many characters can be displayed. If
the caller's name is too long, the
handset may not be able to display or
announce the entire name.
L The announcement is heard at the
same level as the ringer volume (page
16, 23).
L If you turn on the answering system
and set the number of rings "2
rings" (page 36), the unit does not
announce the caller information. If
"Toll saver" is selected and there
is a new message, the unit does not
announce the caller information.
446 views
Usually answered in minutes!
×