How do i disconnect my HBH PV703 Headset from a damaged phone and connect it to another Phone

Step 1 - To reset your Bluetooth headset:

1. Press and hold down the volume keys "+" and "-" on your headset at the same time, until your hear a beep and the light flashes red and green alternately.
2. Press and hold down the volume keys on your headset until it is turned off. The headset is now reset as it was when purchased.

1. Make sure the headset is turned off.
2. Turn on the Bluetooth function and Bluetooth visibility in your phone (This makes the phone visible to other Bluetooth devices).
3. Place the phone within 20 cm (8 inches) from the headset.
4. Press and hold down the call handling key on the headset until it beeps, shows a steady green light and then flashes red and green alternately. If the indicator light only flashes red or green, simultaneously press and hold down both volume keys until the headset beeps and flashes red and green alternately.
5. If your phone supports auto pairing, press "Yes" when you are asked to add the headset to the phone. If not, check your phone User Guide on how to pair the Bluetooth device. If required, the headset passcode is 0000.
6. The headset beeps and flashes green when successfully paired.